journal article·2001-09

Synthesis of boron nitride from ferroboron Part 2 – Leaching

C. Liu, D.J. Fray

Materials Science and Technology· Volume 17· Issue 9
Publisher page

Abstract

Fully nitrided ferroboron powder is leached in simple mineral acids (including hydrochloric acid and sulphuric acid) in order to separate iron/iron nitrides from boron nitride. Weight loss is used to indicate the extent of leaching. Leaching begins with violent chemical reaction and this is followed by a slower, parabolic-like kinetics lasting from 24 to 48 h. In 1 M to 5 M hydrochloric acid leaching can be effectively carried out within 24 h. Amorphous boron nitride produced in mixed NH 3 –N 2 at low temperature (400°C) leaches more readily than partially hexagonal boron nitride produced at higher temperatures in pure N 2 . The possibility of recycling the leaching acid is also demonstrated using an electrochemical cell.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Department of Materials Science and Metallurgy Pembroke Street, Cambridge CB2 3QZ, UK (djf25@hermes.cam.ac.uk)

References (6)

Show source-provided references
1. WARNER T., , LIU C., , and FRAY D. J.: Mater. Sci Technol, 2001, 17, (9), 1039–1044.
2. 10.1007/BF0282560210.1007/BF02825602 ↗
3. 10.1007/BF0046557510.1007/BF00465575 ↗
4. WEBVIER A. W.: ‘Carbide nitride and boride materials synthesis and processing’; 1997 London Chapman and Hall.
5. 10.1007/BF0024194910.1007/BF00241949 ↗
6. PEEK E. M. L.PhD thesis Technical University of Delft The Netherlands 1996.