journal article·1993-06

Microstructural characterisation and mechanical properties of Ni–Ge alloys containing Ni3Ge

A. Gupta, M. C. Chaturvedi, A. K. Jena

Publisher page

Abstract

Six Ni–Ge alloys were prepared and equilibrated at 1000°C. The microstructures, compositions of phases, solubilities in various phases, volume fractions of phases, lattice parameters of Ni3 Ge, and microhardness values of phases were determined. Two alloys contained Ni3Ge and α, one alloy was single phase Ni3Ge, and three alloys contained Ni3Ge and Ni5Ge3. The volume fractions of second phase were 6 and 33%α and 37 and 54%Ni5Ge3. The amount of second phase in the third Ni3Ge–Ni5Ge3 alloy was too low to be determined accurately. The two phase alloys containing 6%α, 37%Ni5Ge3, or 54%Ni5Ge3 were tested in compression. A yield strength maximum was observed in the three alloys. The deformation behaviour of the alloy containing 6%α was similar to that of single phase Ni3Ge: crack formation along Ni3Ge grain boundaries and very low plastic strain were revealed. In alloys containing Ni3Ge and an appreciable percentage of Ni5Ge3, crack formation was not observed along Ni3Ge grain boundaries. Instead, at low temperatures, deformation and crack growth occurred within Ni5Ge3 grains and, at high temperatures, decohesion occurred along the Ni3Ge/Ni5Ge3 interphase. The plastic strain in the alloy containing 54%Ni5Ge3 increased to about 40%.MST/1724
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. 10.2320/matertrans1960.21.23710.2320/matertrans1960.21.237 ↗
2. STOLOFF N. S. · Mater. Sc · 1966 · 3
3. C. L. BRIANT and A. I. TAUB: in MRS Symp. Proc. ‘High tem-perature ordered intermetallic alloys III’, (ed. C. T. Liu et al.), Vol. 133, 281; 1989, Pittsburgh, PA, Materials Research Society.
4. 10.1016/0022-5088(80)90252-010.1016/0022-5088(80)90252-0 ↗
5. 10.1016/0036-9748(89)90045-810.1016/0036-9748(89)90045-8 ↗
6. 10.1557/JMR.1989.141710.1557/JMR.1989.1417 ↗
7. W. B. PEARSON: ‘A handbook of lattice spacings and structures of metals and alloys’; 1964, Oxford/New York, Pergamon Press.
8. WESTBROOK J. H. · Met. Rev., · 1965 · 9 · 145
9. FLINN P. A. · Trans. AIME · 1960 · 218 · 145
10. N. s. STOLOFF: in ‘Strengthening methods in crystals’, (ed. A. Kelly and R. B. Nicholson), 193; 1971, New York, Wiley.
11. 10.1179/imr.1989.34.1.15310.1179/imr.1989.34.1.153 ↗