Plane strain fracture toughness of modern ferritic structural steels
Source abstract
Abstract
The temperature dependence of the plane strain fracture toughness of a low carbon, fine grain, ferritic steel for structural applications is investigated. The ductile–brittle transition is found to occur in the interval between 160 and 184 K. The experimental results are interpreted by an analytical model which permits calculation of the plane strain fracture toughness K 1c in the brittle domain as a function of the tensile properties and the cleavage fracture stress, making use of a piecewise approximation for the distribution of tensile stress on the crack axis and applying a deterministic fracture criterion at the stress peak. A similar criterion, which consists of equating the severest strain on the crack axis to a critical strain for cavity nucleation, provides the upper shelf fracture toughness. A relatively simple figure for predicting the transition temperature of steels in this family as a function of material properties can be obtained in this way.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. 10.1007/BF0264468510.1007/BF02644685 ↗
2. 10.1179/mst.1994.10.4.33410.1179/mst.1994.10.4.334 ↗
3. 10.1179/mst.1997.13.8.64510.1179/mst.1997.13.8.645 ↗
4. 10.1016/0001-6160(72)90102-210.1016/0001-6160(72)90102-2 ↗
5. 10.1016/0013-7944(90)90025-C10.1016/0013-7944(90)90025-C ↗
6. 10.1007/BF0264948010.1007/BF02649480 ↗
7. 10.1016/0022-5096(86)90013-X10.1016/0022-5096(86)90013-X ↗
8. 10.1016/0013-7944(89)90247-610.1016/0013-7944(89)90247-6 ↗
9. 10.1016/0022-5096(71)90009-310.1016/0022-5096(71)90009-3 ↗
10. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
11. 10.1016/0022-5096(88)90027-010.1016/0022-5096(88)90027-0 ↗
12. 10.1016/0022-5096(77)90003-510.1016/0022-5096(77)90003-5 ↗
13. 10.1179/msc.1978.12.11.51110.1179/msc.1978.12.11.511 ↗
14. BROZZO P. · Prakt. Metallogr · 1992 · 29 · 413
15. YAROSHEVIC V. D. · Sov. Phys. Solid State · 1970 · 12 · 363
16. 10.1016/0022-5096(68)90013-610.1016/0022-5096(68)90013-6 ↗
17. J. R. RICE and M. A. JOHNSON: 'Inelastic behavior of solids', 641; 1970, New York, McGraw Hill.
18. 10.1016/0022-5096(68)90014-810.1016/0022-5096(68)90014-8 ↗
19. 10.1016/0022-5096(94)00064-C10.1016/0022-5096(94)00064-C ↗
20. P. BROZZO: `Struttura e proprietà meccaniche dei materiali metallici', 1730–1732; 1979, Genoa, ECIG.
21. 10.1088/0034-4885/12/1/30910.1088/0034-4885/12/1/309 ↗
22. 10.1080/1478643700823841510.1080/14786437008238415 ↗
23. 10.1016/0022-5096(69)90033-710.1016/0022-5096(69)90033-7 ↗
24. MCMEEKING R. M. · J. Eng. Technol · 1977 · 99 · 290
25. H. KOTILAINEN: 12th Int. Symp. on 'Fracture mechanics', STP700, 352; 1980, Philadelphia, PA, ASTM.10.1520/STP36980S ↗
26. KRAFFT J. M. · Trans. Am. Soc. Met · 1963 · 56 · 160
27. 10.1016/0022-5096(86)90020-710.1016/0022-5096(86)90020-7 ↗
28. 10.1179/mst.1998.14.2.12310.1179/mst.1998.14.2.123 ↗
29. R. BALDACCI: `Scienza delle costruzioni I', 363; 1970, Turin, UTET.