Influence of heat treatment and spraying angle on cohesion strength of plasma sprayed deposits
Source abstract
Abstract
The influence of heat treatment and spraying angle on the cohesion strength of plasma sprayed deposits has been studied. Three coatings were selected: NiCr+Cr2O3, ZrO2−1;O3 (8 wt-%), and Mo. The substrate used was aferritic Cr steel. Heat treatments of 4 h were conducted after spraying in the temperature range 600–900° C and the spraying angle varied from 45 to 90° to the surface of the sample. The cohesion strength of the deposit was measured using tensile tests. For the Cr2O3 deposit, the cohesion tensile strength was found to increase strongly with the temperature of the heat treatment but was not influenced by spraying angle. For the ZrO2−8Y2O3 coating neither the heat treatment nor the spraying angle affected the cohesion strength, whereas for the Mo coating, the cohesion strength increased with decreasing spraying angle and heat treatment had no effect.MST/2012
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. 10.1016/0040-6090(90)90481-R10.1016/0040-6090(90)90481-R ↗
2. 10.1557/JMR.1993.007810.1557/JMR.1993.0078 ↗
3. HASUI A. · Trans. Natl Res. Inst. Met. (Jpn) · 1970 · 12 · 9
4. 10.1116/1.131274610.1116/1.1312746 ↗