Effects of residual porosity on strength of Sn–Pb/Cu 6 Sn 5 particulate composites
Source abstract
Abstract
The effect of residual porosity on the flow stress of particulate composites was studied for a composite in which it is possible to create high porosity (>60%) by using particle coatings. The material was a eutectic composition Sn–Pb solder with additions of intermetaliic CU 6 Sn 5 particles. It was found that porosity affects the strength of these composites much less than for non-composites, an effect attributed to particle bonding during solidification. At the same time, residual porosity was found to inhibit strongly or even to prevent hardening of this material. A micromechanical model is developed which simulates this behaviour over a wide range of porosities. MST/1928
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. 10.1016/S0065-2156(08)70195-910.1016/S0065-2156(08)70195-9 ↗
2. CLOUGH R. B. PATEL R. HWANG J. S. and LUCEY G. K.Jr: ill Proc. National Electronic Packaging and Production Conf. (NEPCON) Vol. 3 1256–1265; 1992 Anaheim CA NEPCON.
3. LOW S. R. Hi, , FIELDS R. J., , and LUCEY G. K.Jr: in Proc. 41st Electronic Components and Technology Conf., IEEE Publication no. 91CH2889-2, 292–298; 1991, New York, Institute of Electrical and Electronics Engineers.
4. MARSHALL J. L. CALDERON J. MILLER D. DESIMONE M. and SEES J.: in Proc. 41st Electronic Components and Technology Conf. IEEE Publication no. 91CH2889-2 647–652; 1991 New York Institute of Electrical and Electronics Engineers.
5. 10.1179/mst.1993.9.4.32810.1179/mst.1993.9.4.328 ↗
6. BROWN S. B., and WEBER G.A.: Mod. Dev. Powder Metall., 1988, 18–21, 465–476.
7. 10.1016/0020-7403(76)90030-810.1016/0020-7403(76)90030-8 ↗
8. HUPPMANN W. J., and HIRSCHVOGEL M.: Int. Met. Rev., 1978, 23, (5), 209–239.
9. MASSEY B.: ‘Mechanics of fluids’ 5 edn 176; 1983 Wokingham Berks. Van Nostrand Reinhold.
10. In ‘Metals handbook’ 9 edn Vol. 2 620; 1979 Metals Park OH ASM.
11. VAYNMAN S. as. E. FINE and D. A. JEANNOTTE: in ‘Solder mechanics: a state of the art assessment’ (ed. Frear D. et al.) 155–189; 1991 Warrendale PA The Minerals Metals and Materials Society.
12. In ‘Metals handbook’ 9 edn Vol. 9 p. 457 Fig. 45;1985 Metals Park OH ASM.
13. 10.1109/33.1665510.1109/33.16655 ↗
14. FISCHER J. LUSK L. HINKLEY D. DOWD M. BOSICE G. and norr M.: ‘Reliability assessment of antimony removal from tin—lead solders’ Report no. NWC TP-7163 Naval Weapons Center China Lake CA 1992 219–236.
15. 10.1016/0001-6160(85)90177-410.1016/0001-6160(85)90177-4 ↗
16. 10.1115/1.317361810.1115/1.3173618 ↗
17. 10.1016/0020-7403(84)90006-710.1016/0020-7403(84)90006-7 ↗
18. 10.1115/1.344340110.1115/1.3443401 ↗
19. 10.1016/0022-5096(89)90014-810.1016/0022-5096(89)90014-8 ↗