journal article·2009-08

Influence of beam polarisation in laser bending process

J. Liu, S. Sun, Y. Guan

Materials Science and Technology· Volume 25· Issue 8
Publisher page

Abstract

In this paper, the influence of beam polarisation in the laser bending process was experimentally studied. Based on the laser beam polarisation, the laser absorption of the metallic specimen could be enhanced by increasing the incident angle. The bending angles are achieved in stainless foil specimens without absorptive coatings, and larger bending angles can be produced by single laser scanning with higher incident angles. Multipass laser bending experiments were also carried out on the same material with graphite coatings. The results show that the bending angle per pass is affected obviously by the beam polarisation at lower laser line energy; and the bending angle per pass increases significantly when the total bending angle is large enough. When using polarised light, the laser beam distortion and laser absorption change induced by the variation of the absorptive coatings and laser incident angle are the two main factors that affect the coupled laser energy. The bending rule is the synthesis effect of the two factors.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Liquid Structure and Heredity of MaterialsMinistry of Education, Mold and Die Engineering Technology Research Center, Shandong University, Jinan 250061, China

Key Laboratory of Liquid Structure and Heredity of MaterialsMinistry of Education, Mold and Die Engineering Technology Research Center, Shandong University, Jinan 250061, China;, Email: liujiesdu@hotmail.com

References (10)

Show source-provided references
1. Abed E. · LANE · 2007 · 2
2. Reeves M., Moore A. J., et al. ‘Dynamic distortion measurements during laser forming of Ti-6A1-4V and their comparison with a finite element model’. Proc. Institute of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 1 December, 2003, v217, n12,1685–1696.10.1243/095440503772680613 ↗
3. 10.2961/jlmn.2006.01.001110.2961/jlmn.2006.01.0011 ↗
4. 10.1016/S0007-8506(07)62448-210.1016/S0007-8506(07)62448-2 ↗
5. Vollertsen F. ‘Mechanisms and models for laser forming’, Laser Assisted Net Shape Engineering. Proc. LANE ‘94,Vol. 1, 1994, Meisenbach Bamberg, Germany,345–360.
6. Carey C., Cantwell W. J., Dearden G., et al. ‘Effects of laser interaction with graphite coatings’, Laser Assisted Net Shape Engineering 5, LANE 2007,673–686.
7. 10.1016/S0924-0136(03)00603-410.1016/S0924-0136(03)00603-4 ↗
8. Lijun L. ‘Modern laser processing and the equipment’,Vol. 1, 23-24; 1993, Beijing, Beijing Institute of Technology Press. (In Chinese)
9. Behler K., et al.: Using the beam polarization to enhance the energy coupling in laser beam welding. Proc. 7th Int. Cong. Applications of Lasers and Electronics, ICALE0'88, UK, 1989; Springer-Verlag IFS Ltd.
10. 10.1088/0022-3727/39/2/02110.1088/0022-3727/39/2/021 ↗