Unlubricated sliding of a titanium aluminide alloy against M2 tool steel
Source abstract
Abstract
This study is an extension of continuing research on the wear behaviour of gamma-TiAl base alloys, which has demonstrated how a surface reaction layer, made of native oxides, can dramatically improve the dry sliding wear resistance of the Ti-48Al-2Cr-2Nb-1B at.- alloy. The results presented provide a further insight on the wear behaviour of the coated alloy under different loading conditions. Moreover, specific attention has been paid to the study of the tribological coupling and of the wear mechanisms affecting an M2 steel counterface disc. The steel counterface is abrasively worn by the oxide asperities present on the alloy surface. Wear debris remains trapped between the sliding surfaces and gets oxidised. Therefore, wear debris may contribute to further accelerate the wear rate before leaving the system or being compacted on the wear tracks to form protective glazes. Once the main wear mechanism was clearly identified, some tests were conducted on alloy specimens which had their surface oxide mechanically smoothed. This operation proved to be very successful indeed. In fact as a result, not only did the gamma-TiAl alloy have a zero wear rate, but also a significant reduction of the abrasive contribution to the wear rate of the steel counterface was detected. Both these improvements were observed even at the highest load employed in the investigation 500 N.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. I. M. HUTCHINGS: `Tribology', 91; 1992, London, Edward Arnold.10.1016/0926-860X(92)85180-J ↗
2. 10.1016/S0257-8972(99)00532-010.1016/S0257-8972(99)00532-0 ↗
3. F. H. FROES and C. SURYANARAYANA: in 'Physical metallurgy and processing of intermetallic compounds', (ed. N. S. Stoloff et al), 297–350; 1996, New York, Chapman and Hall.10.1007/978-1-4613-1215-4_8 ↗
4. 10.1007/s11661-999-0012-110.1007/s11661-999-0012-1 ↗
5. 10.1179/mst.1998.14.2.14310.1179/mst.1998.14.2.143 ↗
6. 'Materials properties handbook: titanium alloys', 1154; 1994, Materials Park, OH, ASM International.
7. M. F. ASHBY: 'Materials selection in mechanical design (Materials and process selection charts)', 36–37; 1992, Oxford, Pergamon.
8. O. VINGSBO and s. HOGMARK: in 'Fundamentals of friction and wear of materials', (ed. D. A. Rigney), 373–408; 1980, Metals Park, OH, American Society for Metals.
9. J. C. ANDERSON, K. D. LEAVER, R. D. RAWLINGS, and J. M. ALOCANDER: 'Materials science', 4th edn, 212; 1990, Bury St Edmunds, Chapman and Hall.10.1007/978-1-4899-6826-5 ↗
10. STOTT F. H. · Tribol mt · 1978 · 14 · 123
11. E. RABINOWICZ: 'Friction and wear of materials', 2nd edn, 104, 1995, New York, Wiley.