Mechanical properties of low carbon-vanadium microalloyed quenched and tempered steels vvith aluminium additions
Source abstract
Abstract
The mechanical properties of Fe–0·1 C–1·5Mn–0·05V steels with varying Al contents (0·04–0·35 wt-%) were examined in the tempered condition. After hot rolling, the steels were solution treated at 1200°C for 2 h, then quenched into water. Tempering was mainly carried out at 600 or 650°C for 1 h. Hardness, tensile strength, and Charpy toughness were studied and compared with the microstructure. The precipitates were measured and identified using transmission electron microscopy and energy dispersive X-ray analysis. It wasfound that the precipitation ofVC was at a minimum in the steel containing 0·13%Al, and it is suggested that the precipitation of VC or V (C, N) was retarded at this level of Al addition. The tensile strength and lower ductile-brittle transition temperature decreased to their minimum values in the samples containing 0·1–0·15%Al, which was also believed to be a result of less VC or V(C,N) precipitation giving benefits of increased toughness and a decrease in the transition temperature.MST/3098
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. 10.1007/BF0264638310.1007/BF02646383 ↗
2. KONIG R · Arch. Eisen., · 1961 · 32 · 541
3. SCHMIDT F. · Bander Bleche Rohre · 1968 · 9 · 676
4. ICALETIN Yu. M. · IZU. V.U.Z. Chernaya Metall. · 1989 · 6 · 96
5. WATANABE I. · Nippon Kokan Tech. Rep. (Overseas) · 1986 · 47 · 52
6. 10.1179/mst.1993.9.5.42410.1179/mst.1993.9.5.424 ↗
7. E. TEKIN and R M. KELLY: ‘Precipitation from iron-base alloys’, 173; 1965, Warrendale, PA, AIME.
8. GUTERMAN S. G. · Phys. Met. Metallogr., · 1960 · 10 · 109
9. ROBERTS H. J. · Metall. Trans., · 1970 · 1 · 328710.1007/BF03037855 ↗
10. IRVINE K. J. · J. Iron Steel Inst., · 1960 · 194 · 137
11. MEYER L. · Stahl Eisen · 1969 · 89 · 1235
12. 10.1007/BF0264688210.1007/BF02646882 ↗
13. 10.1143/JPSJ.27.92910.1143/JPSJ.27.929 ↗
14. GRANGE R. A. · Trans. ASM · 1966 · 59 · 26
15. 10.1007/BF0265830510.1007/BF02658305 ↗
16. T. E. SWARR and G. KaAuss: in ‘Grain boundaries in engineering materials’, (ed. J. L. Walter et al.), 127; 1975, Baton Rouge, LA, Claitors Publishing Division.
17. 10.1016/0025-5416(82)90176-810.1016/0025-5416(82)90176-8 ↗
18. 10.1007/BF0264638210.1007/BF02646382 ↗
19. 10.1007/BF0264243610.1007/BF02642436 ↗
20. 10.1007/BF0264465410.1007/BF02644654 ↗
21. NORSTROM L. A. · Scand. J. Metall., · 1976 · 5 · 159
22. LESLIE W. C. · Trans. ASM · 1967 · 60 · 459
23. W. H. · J. Iron Steel Inst., · 1971 · 209 · 476
24. 10.1007/BF0264403710.1007/BF02644037 ↗
25. 10.1179/imr.1988.33.1.22110.1179/imr.1988.33.1.221 ↗
26. ICHIYAMA T. · Trans. Iron Steel Inst. Jpn · 1970 · 10 · 42910.2355/isijinternational1966.10.429 ↗
27. XUE H. · PhD thesis · 1994
28. 10.1179/imtr.1981.26.1.18510.1179/imtr.1981.26.1.185 ↗
29. T. N. BAKER: in ‘Yield flow and fracture of polycrystals’, (ed. T. N. Baker), 235; 1983, London and New York, Applied Science.
30. 10.1063/1.171383510.1063/1.1713835 ↗
31. H. K. D. H. BHADESHIA: ‘Bainite in steels’, 28; 1992, London, The Institute of Materials.
32. SPEICH O. R. · Trans. TMS—AIME · 1969 · 245 · 2553
33. T. GLADMAN and F. B. PICKERING: in ‘Yield, flow and fracture of polycrystals’, (ed. T. N. Baker), 141; 1983, London Applied Science.
34. OHTANI H. · Trans. Iron Steel Inst. Jpn · 1972 · 12 · 11810.2355/isijinternational1966.12.118 ↗
35. 10.1179/03071697780329206010.1179/030716977803292060 ↗
36. M. BINGLEY and T. SIWECKE in Proc. Conf. ‘Strength of metals and alloys’, (ed. P. O. Kettunen et al.), 1191; 1988, Oxford, Pergamon Press.
37. 10.1179/03071697980327624610.1179/030716979803276246 ↗
38. T. GLADMAN, B. HOLMES, and I. D. McIVOR: in ‘Effect of second phase particles on the mechanical properties of steels’, 101; 1971, London, The Iron and Steel Institute.