Evaluation of laser treated copper alloys
Source abstract
Abstract
Copper alloys of composition Cu–35Zn–3Pb and Cu–31Ni–1·9Cr were laser treated and characterised using optical and scanning electron microscopy and stress corrosion experiments. Laser induced defects in the former alloy increased the variability in the time to failure by stress corrosion cracking in the laser treated specimens relative to the bulk. The latter alloy, when laser treated, has a defect free surface which is more resistant to pitting in sea water than that of the bulk and is not susceptible to stress corrosion cracking despite the stress corrosion cracking sensitivity of conventional gas metal arc welds in this alloy. Practically, the results suggest that laser induced defects may limit the acceptable process window of laser treated copper alloys intended for use in sea water.MST/1975
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. C. W. DRAPER: in 'Lasers in metallurgy', (ed. K. Mukerjee and J. Mazumder), 21–23; 1981, Warrendale, PA, The Metallurgical Society of AIME.
2. 10.1016/0040-6090(81)90165-610.1016/0040-6090(81)90165-6 ↗
3. 10.1002/sia.74002050510.1002/sia.740020505 ↗
4. I. E. ANDERSON and B.B. BATH: in 'Rapidly solidified crystalline alloys', (ed. S. K. Das et al.), 219–241; 1985, Warrendale, PA, The Metallurgical Society of AIME.
5. 10.1007/BF0240284110.1007/BF02402841 ↗
6. C. W. DRAPER, J. M. VANDENBERG, C. M. PREECE, and C. R. CLAYTON: 'Rapidly solidified amorphous and crystalline alloys', (ed. B. H. Kear et al.), 529–533; 1982, New York, Elsevier Science.
7. DUBNYAKOV V. N. · Soc. J. Frict. Wear · 1986 · 7 · 70
8. TAYLOR R. J. · Corros. Aust. · 1987 · 12
9. P. J. OAKLEY and N. BAILEY: in 'Laser welding, machining and materials processing', (ed. C. Albright, 169–177; 1976, New York, Springer-Verlag.
10. C. V. HYATT and K.D. MACKAY: in Proc. 'International conference on beam processing of advanced materials', (ed. J. Singh and S. M. Copley), 247–258; 1993, Warrendale, PA, The Minerals, Metals and Materials Society.
11. P. MOORE, C. KIM, and L. S. WEINMAN: in 'Applications of lasers in materials processing', 259–272; 1979, Metals Park, OH, ASM.
12. 10.1063/1.32501510.1063/1.325015 ↗
13. 10.1016/0010-938X(80)90128-610.1016/0010-938X(80)90128-6 ↗
14. R. H. RARING and J.A. REINBOLT: 'A small inexpensive device for sustained loading testing', ASTM Bulletin', TP 84, 74, 1965, Philadelphia, PA, ASTM.
15. 10.1007/BF0269859310.1007/BF02698593 ↗