journal article·1986-06-01

Influence of manganese and sulphur on overheating of some low-alloy steels

G. E. Hale, S. Preston, J. Nutting

Publisher page

Abstract

An assessment has been made of the overheating behaviour of three low-alloy steels used in the electric power generating industries. The steels, 1Cr–Mo–V, 2·25Cr–1Mo, and 3·5Ni–Cr–Mo–V have been prepared as high-purity versions with low tramp element contents, sulphur contents of 0·001%, and manganese contents of 0·02 and 0·2%. For comparison, commercial steels produced by good practice and containing 0·006–0·011%S and 0·17–0·21%Mn have also been examined (all compositions in wt-%). The upper shelf energies of the high-purity versions of the steels in the fully heat treated condition indicate that these steels do not overheat after treatment at temperatures up to 1400°C, whereas the commercial versions do overheat and, in some cases, show a severe reduction in their impact energy levels. In some cases, the high-purity steels show an unusually low tendency to austenite grain growth after reheating at temperatures up to 1400°C. The results obtained show that new specifications for low–alloy steels could be developed which would give freedom from overheating during forging and greatly improved upper shelf energies after heat treatment.MST/362
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (1)

Show source-provided references
1. 1984 · 29 · 27310.1179/imtr.1984.29.1.273 ↗