Preparation of Ni/YSZ for SOFC anodes by buffer-solution method
Source abstract
Abstract
The properties of Ni/YSZ cermet, which has been used as the anode material for solid-oxide fuel cells (SOFC), depends strongly on its microstructural features. In this paper, three kinds of Ni/YSZ cermets were prepared by the buffer-solution method. It was found that the buffer-solution method, compared with the mechanical mixing method, can assure more homogeneous distribution of Ni in YSZ substrate. As a result, in the examined temperature range from 836 ℃ to 1 188 ℃, the conductivity of the sample with 43 wt% Ni prepared by the buffer-solution method is always much higher than that of the sample with same Ni content prepared by the traditional mechanical mixing method. Furthermore, the sample with 43 wt%Ni has a conductivity of 709.73 s·cm -1 at 1 000 ℃ and is a promising anode material for SOFC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Gas Sensing Nanomaterials and Sensors · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.