Formation of fine microstructures in twin roll cast stainless strip
Source abstract
Abstract
In order to elucidate the formation of various microstructures in the twin roll cast strip, the strip casting experiments of 704 and 1Cr18Ni9Ti austenitic stainless steel were done by using a laboratory scale twin roll caster. The formation mechanisms of these microstructures are discussed using metallography and crystallization thermodynamics, and the forming condition of these microstructures was also simulated using FEM numeric simulation. The results show that the surface chilling structure grain size under 1μm, and fine dendrites whose size under 2μm can be obatined by using the twin roll casting technology. These fine grains improved the capability of corrosion resistantce in size of strip surface. In the casting strip, not only the fine equiaxed crystal in the middle of the strip was found, but also the rough equiaxed crystals was found in the dendrite zone, and the formation mechanics of these rough equiaxed crystals was explained.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.