Corrosion fatigue characterisation of sintered multiphase stainless steels
Source abstract
Abstract
Multiphase stainless steels are produced for their attractive properties of mechanical strength and corrosion resistance relative to their austenite–ferrite structure. The manufacture of these steel by powder metallurgy technology presents some advantages in terms of low cost and formability of complex shapes. Mechanical and corrosion resistances are not at the level of the wrought steels due to their porous nature. In this work the fatigue and corrosion fatigue behaviour of some sintered steels obtained by sintering from 316L and 434L base powders has been studied for characterisation and comparison. The sintered steels were fatigue tested in two different environments: air and NaCl aqueous solution. The tests performed indicate that the chemical and microstructral composition has no great influence on fatigue behaviour in comparison with the manufacturing technology (sintering). This is most evident in the more aggressive environment, like seawater, in which these steels could be advantageously used. The analysis of fracture surfaces using SEM microscopy shows a peculiar crack propagation characterised by cleavage, stress intensification due to porosity, and features of localised ductility on sintering necks and base powder particles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. ‘Metals handbook 9th edn’ Vol. 7; 1984 Materials Park OH 9th edn’ Vol. 7; 1984 Materials Park OH ASM International.
2. Gunn R. N.: ‘Duplex stainless steels’ Vol. 4; Cambridge Abington Publishing.
3. Hämäläinen E., , Laitinen A., , Hänninen H., and Liimatainen J.: Mater. Set Technol., 1997, 13, 338–340.
4. 10.1080/02670836.1996.1166572310.1080/02670836.1996.11665723 ↗
5. Kazior J. Marcu Puscas T. Pieczonka T. Fedrizzi L. Nykiel M. and Molinari A.: Proc. 12 Int. Conf. on ‘Powder metallurgy and particulate materials’ New York July 2000.
6. 10.1179/00325890166616710.1179/003258901666167 ↗
7. Marcu Puscas T., and Molinari A.: La Metall. Rat, 2003, 6, 21–25.
8. 10.1179/mst.1997.13.5.42010.1179/mst.1997.13.5.420 ↗
9. Brotzu A. Cavallini M. Felli F. and Marchetti M.: Proc 18th Int. Conf. on ‘Fatigue in presence of corrosion’ Corfit Greece October 1998 p. 8.
10. Felli F. and Scicutelli A.: Proc 10th Int. Conf. on ‘Materials and processing’ Honolulu USA October 2001.
11. Iacoviello F. Di Cocco V. Cavallini M. and Molinari A.: Proc. 29th Convegno Nazionale AIM Modena Italy November 2002.
12. Collipriest J. E. Ehret R. Y. and Thatcher C.: ‘Fracture mechanics equation for cyclic crack growth’ Technology Utilisation Report MFS 24447 NASA USA 1973.
13. Paris P. C. and Erdogan F.: J. Basic Eng 1963 85n 528.10.1115/1.3656900 ↗