Development of microstructure and mechanical properties of as cast Al–Mg–Mn alloy during high temperature ECAP
Source abstract
Abstract
A large scale billet with diameter of 58·5 mm of an as cast Al–Mg–Mn alloy was processed by equal channel angular pressing (ECAP) at 350°C up to six passes. A significant refinement of the grains was observed after six pressings to ∼2 μm. And the selected area electron diffraction (SAED) pattern showed that almost all of the grains were separated by boundaries with high angles of misorientation. A banded substructure was not observed during the hot ECAP, and a reasonably equiaxed structure was obtained just after one single pressing. Both the strength and the elongation increased abruptly in a single passage through the die, but thereafter, the increase was more gradual and exhibited a saturation effect after the fourth pressing. The good combination of strength and ductility of the Al–Mg–Mn alloy attained by the hot ECAP appeared to be attractive properties for industrial applications. Moreover, hot ECAP could possibly be used as an alternative step to hot extrusion or hot rolling in industrial processing, to break down an initial coarse as cast structure in a quite large scale billet.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. 10.1007/s11661-000-0011-810.1007/s11661-000-0011-8 ↗
2. 10.1016/0921-5093(95)09705-810.1016/0921-5093(95)09705-8 ↗
3. Xu C., Furukawa M., Horita Z., and Langdon T. G.: Acta Mater. 2003, 51, 6139–6149.10.1016/S1359-6454(03)00433-6 ↗
4. 10.1016/S0921-5093(02)00216-210.1016/S0921-5093(02)00216-2 ↗
5. Valiev R. Z. · Frog. Mater. Sci · 2000 · 45 · 103
6. Ning J. L., and Jiang D. M.: Mater. Sci. Eng. A, 2007, A452-A453,552–557.
7. 10.1016/S0921-5093(03)00508-210.1016/S0921-5093(03)00508-2 ↗
8. Wang J., Iwahashi Y., Horita Z., Furukawa M., Nemoto M., Valiev R. Z., and Langdon T. G.: Acta Mater. 1996, 44, 2973–2982.10.1016/1359-6454(95)00395-9 ↗
9. 10.1179/02670830010150747910.1179/026708300101507479 ↗
10. 10.4028/www.scientific.net/MSF.503-504.72110.4028/www.scientific.net/MSF.503-504.721 ↗
11. 10.1016/S0924-0136(01)01102-510.1016/S0924-0136(01)01102-5 ↗
12. Ning J. L. · Mater. Charact
13. 10.1016/S0921-5093(01)01339-910.1016/S0921-5093(01)01339-9 ↗
14. Iwahashi Y. · Mater · 1998 · 46 · 3317
15. 10.1007/s11661-997-0234-z10.1007/s11661-997-0234-z ↗
16. Iwahashi Y. · Mater · 1997 · 45 · 4733
17. Xu C., Furukawa M., Horita Z., and Langdon T. G.: Mater. Sci24. Eng. A, 2005, A398,66–76.10.1016/j.msea.2005.03.083 ↗
18. 10.1007/s11661-998-0222-y10.1007/s11661-998-0222-y ↗
19. 10.1016/j.msea.2004.04.04910.1016/j.msea.2004.04.049 ↗
20. Chang S.-Y. · J. Alloys Compd · 2005 · 386 · 28
21. 10.1016/S0921-5093(01)01681-110.1016/S0921-5093(01)01681-1 ↗
22. 10.2320/matertrans.42.107410.2320/matertrans.42.1074 ↗
23. 10.1016/S1359-6454(96)00156-510.1016/S1359-6454(96)00156-5 ↗
24. 10.1179/02670830010150742410.1179/026708300101507424 ↗
25. 10.1038/nature0113310.1038/nature01133 ↗
26. Dupuy L., and Blandin J.J.: Acta Mater. 2002, 50, 3251–3264.10.1016/S1359-6454(02)00147-7 ↗
27. 10.1016/j.msea.2003.11.04210.1016/j.msea.2003.11.042 ↗
28. 10.1063/1.146552810.1063/1.1465528 ↗