journal article·2009-05

Coupled heat and fluid flow model and experimental verification of aluminium plate die casting

M. A. Taha, N. A. El-Mahallawy, A. M. El-Sabbagh

Materials Science and Technology· Volume 25· Issue 5
Publisher page

Abstract

The present work aims to forecast mould filling, void shape, location and size as well as columnar to equiaxed transition (CET) in commercial pure aluminium casting. A model coupling the momentum equations of the fluid flow and heat transfer equations is presented, in which metallostatic pressure, air gap and oxide layer are considered. Different casting parameters were investigated such as casting configuration by varying the plate thickness from 5 to 20 mm, melt superheat from 40 to 120°C, mould preheat up to 200°C and different pouring heads ranging from 0·3 to 0·6 m. Regarding the microstructure and void formation, the approach based on the Niyama criterion, was considered. The experimental verification of the model was achieved by gravity die casting in the form of a rectangular cavity. Voids inside aluminium plate were investigated by X-ray imaging. Microstructure and CET was investigated microscopically. The supposed model proves its validity for mould filling and in detecting the void features and CET.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Bonollo F., Urban J., Bonatto B., and Botter M.: Metall Ital. 2005, 6, 23–32.
2. Stefanescu D. M.: Proc. Conf. on ‘Numerical simulation of casting solidification in automotive applications’, 69-97; 1991, Warrendale, PA, TMS.
3. Pequet C., and Rappaz M.: in ‘Modelling of casting, welding and advanced solidification processes IX’, 71-81; 2000, Aachen, Shaker Verlag.
4. 10.1007/s11663-998-0048-410.1007/s11663-998-0048-4 ↗
5. 10.1088/0965-0393/13/6/00910.1088/0965-0393/13/6/009 ↗
6. Dai N. M., and Goldak J. A.: in ‘Modelling of casting, welding and advanced solidification processes VII’, 57-65; 1995, Warrendale PA, TMS.
7. Barkhudarov M. R. · Proc. Conf. on ‘Solidification process’, (ed.
8. El-Sabbagh A. · 2004
9. 10.1007/s11663-001-0009-710.1007/s11663-001-0009-7 ↗
10. Poirier R., and Poirier E. J. ‘Heat transfer fundamentals for metal casting’, 2nd edn; 1994, Warrendale, PA, TMS.
11. Hassan A. · 1999
12. 10.1007/s11837-005-0025-110.1007/s11837-005-0025-1 ↗
13. Berry J. T., and Pehlke R. D.: in ‘Metals handbook’, 9th edn,Vol. 15, ‘Modelling of solidification heat transfer’, 858-866; 1988, Materials Park, OH, ASM International.
14. Fryer Y. D., Bailey C., Cross M., and Chow P.: in ‘Modelling of casting, welding and advanced solidification processes VI’, 143-151; 1993, Warrendale, PA, TMS.
15. Niyama E., Uchida T., Morikawa M., and Saito S.: Proc. 49th Int. Foundry Cong., Chicago, IL, USA, April 1982, AFS, Paper 10.
16. Rigaut C., Laurent V., Kreziak G., and Laty P.: in ‘Modelling of casting, welding and advanced solidification processes VI’, 277-284; 1993, Warrendale, PA, TMS.
17. McClain S., Berry J., and Dawsey B.: AFS Trans. 2003, 111, 147–158.
18. 10.1007/s11663-002-0027-010.1007/s11663-002-0027-0 ↗