Combining predictions in a simplified 4-Θ methodology for creep life assessment: An application to 2Cr—1Mo steel
Source abstract
Abstract
A simplification of the 4-Θ methodology is proposed and then used to predict creep properties under non-accelerated test conditions using data on 2Cr–1Mo steel. In the proposed simplification, creep rates at very low strains were first used to predict the minimum creep rates which are then used in the Monkman–Grant relation to predict times to failure. Because various strains can be used in this simplification, predictions using creep rates at various strains were combined in an optimal manner. These predictions were then compared with those obtained through the traditional application of the 4-Θ methodology. These predictions were assessed using the mean absolute percentage error (MAPE) and mean square error (MSE) which were further decomposed into systematic and random components. When considering the accuracy of the extrapolations for both minimum creep rates and times to failure, most of the simplified 4-Θ models produced lower MSE and MAPE compared with the traditional implementation of the 4-Θ methodology. All models also had very similar random components of the MSE. A simplified 4-Θ model that used creep rates measured at higher strain usually produced better extrapolations (as measured by the MAPE) than those obtained by combing the extrapolations from a number of simplified 4-Θ models. However, combing predictions in this way tended to increase the random component of the MSE.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. 10.1023/B:JMSC.0000017768.59276.3f10.1023/B:JMSC.0000017768.59276.3f ↗
2. 10.1179/mst.1989.5.7.69910.1179/mst.1989.5.7.699 ↗
3. 10.1179/02670830077300260910.1179/026708300773002609 ↗
4. 10.1179/02670830110151027610.1179/026708301101510276 ↗
5. Kachanov L. M.: in ‘The theory of creep’, (ed. Kennedy A. J.); 1967, Boston Spa, UK, National Lending Library.
6. Rabotnow Y. N. ‘Creep problems in structural members’; 1969, Amsterdam, North Holland Publishing Company.
7. 10.1016/0020-7403(90)90150-H10.1016/0020-7403(90)90150-H ↗
8. 10.1115/1.55618410.1115/1.556184 ↗
9. Willis M. · 1991
10. ‘NRIM creep data sheet’, No. 3B, National Research Institute for Metals, Tokyo, Japan, 1986.
11. Monkman F. C., and Grant N. J.: in ‘Deformation and fracture at elevated temperatures’, (ed.Grant N. J., and Mullendore A. W.), Chap. 4, 1963, Boston, MA, MIT Press.
12. Dobes F. · Metal. Set · 1976 · 10 · 382
13. 10.1179/02670839977300336710.1179/026708399773003367 ↗
14. Evans M.: Proc. Int. Conf. on ‘Creep and fracture in high temperature components —design and life assessment issues’, London, UK, 2005, European Creep Collaborative Committee.
15. 10.1057/jors.1969.10310.1057/jors.1969.103 ↗
16. 10.1002/for.398003020710.1002/for.3980030207 ↗
17. 10.1243/030932400151416110.1243/0309324001514161 ↗
18. Theil H. ‘Applied economic forecasting’; 1966, Chicago, IL, Rand McNally & Co.
19. Pindyck R. S., and Rubinfeld D. L. ‘Econometric models and economic forecasts’, 4th edn, 128-130; 1998, NY, McGraw-Hill.