Effects of the movable die on sheet hydroforming
Source abstract
Abstract
In order to study the effect of the movable die on sheet hydroforming, experiments are carried out on a movable die and a fixed die. In the case of the movable die, two different loading modes are treated in the experiments. These are here denoted loading mode 1 and 2. Based on the experimental results, the conclusion is that compared with the deformation with the movable die and without the movable die, it is much easier to get a good forming of the workpiece when using the movable die, especially when forming shape-complicated workpieces. The thickness distribution is more uniform and the forming limit of the sheet metal is increased in the sheet hydroforming using a movable die. Furthermore, the thickness distribution gets more uniform when using the movable die and adopting loading mode 2 compared to that of adopting loading mode 1.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.