journal article·1986-06

Structural development during production of tubes from rapidly solidified aluminium alloy powder

G. J. Marshall, T. Sheppard

Publisher page

Abstract

A range of tubes has been successfully produced from the fine air atomized powder of an Al–12Mg–0·8Mn alloy. The powder exhibited a cellular solidification morphology with cell boundaries containing a film of β –phase (Al 3 Mg 2 ). Above 700 K, the phase transforms to Al 18 X 2 Mg 3 precipitates during the preheat before processing, but at lower temperatures the transformation takes place only in the deformation zones of the billet. The tube structure of fine precipitates and apparent grains or subgrains is built from the powder in the clearly defined deformation zones. The oxide envelope surrounding powder particles fragments during processing and could not be distinguished in the tube microstructure. The tube structure and properties were largely dependent upon the processing temperature and not the reduction ratio. Yield strengths of more than 500 MN m −2 have been recorded, with ductilities of around 10%, which compares very favourably with conventional aluminium alloy tubes. MST/336
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. FROFS F. H., and PICKENS J. R.: J. Met., 1984. 36, (4), 14.
2. TAN G. H.: PhD thesis, University of London. 1985.
3. SHEPPARD T. and McSHANE H. B.: Powder Met. 1980 23 120.10.1179/pom.1980.23.3.120 ↗
4. 10.1179/03071697980327626410.1179/030716979803276264 ↗
5. ZAIDI M. A.: PhD thesis University of London 1980.
6. SAMSON S.: Ada Crystallogr.,1965, 19, 401.
7. MONDOLFO L. E.: ‘Aluminium alloys: structure and properties’ 560; 1976 London Butterworths.10.1016/B978-0-408-70932-3.50277-1 ↗
8. SHEPPARD T., , ZAIDI M. A., , and TAN G. H.: Powder Met., 1983, 26, 10.
9. 10.1179/03063458379042041110.1179/030634583790420411 ↗
10. TAN G. H. ZAIDI M. A. and SHEPPARD T.: Powder Met. 1984 27 3.10.1179/pom.1984.27.1.3 ↗
11. G. I. MARSHALL E. K. IOANNIDIS and T. SHEPPARD: Powder Met. 1986 29 57.10.1179/pom.1986.29.1.57 ↗
12. BRANDES E. A. (ed.): ‘Smithells metals reference book’ 6 edn 22–4 22-6; 1983 London Butterworths.