journal article·2002-01

Change of fracture mode in Charpy toughness transition temperature range

F. Vodopivec, B. Breskvar, B. Arzenšek, D. Kmetič, J. Vojvodič-Tuma

Materials Science and Technology· Volume 18· Issue 1
Publisher page

Abstract

A transition layer of width 5 - 10 μm was found on the boundary between ductile and brittle fracture for Charpy V notch specimens in the transition temperature range of a structural steel having a microstructure of polygonal ferrite -pearlite. The fracture mode in the transition layer was shearing with occasional submicrometre dimples. From tensile tests on notched specimens, the cleavage fracture stress and flow stress by ductile decohesion were determined. Based on the experimental data and the assumption that the volume of metal involved in the plastic deformation during fracture was related to the volume of the dimples, it was deduced that the transition layer width represents the size of the plastic zone immediately before cleavage initiation. The crack opening displacement and the crack tip radius for the change of fracture mode were calculated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. VOJVODIC-GVARDJANCIC J.: ‘Conditions for the brittle transition in small grained microalloyed steels’, PhD thesis, University of Ljubljana, 1993.
2. VODOPIVEC F., , BRESKVAR B., , VOJVODIC-TUMA J., , and KMETIC D.: Kovine Zlitine TechnoL, 1999, 33, 393–400.
3. 10.2320/jinstmet1952.54.4_42010.2320/jinstmet1952.54.4_420 ↗
4. CHENG J. H., and WANG Z. H.: MetalL Mater. Trans. A, 1994, 25A, 1381–1390.
5. JIANG Y., , LEI M., , ZHONG S., , and JIANG S.: Acta M etall. Sin., 1998, 34, 950–958.
6. 10.1023/A:100730490057810.1023/A:1007304900578 ↗
7. 10.1016/0013-7944(89)90067-210.1016/0013-7944(89)90067-2 ↗
8. JOKOHAMA K., and NAGUMO M.: MetalL Mater. Trans. A, 1998, 29A, 551–558.
9. WANG G. Z., , CHEN J. N., , and LI Z. H.: MetalL Mater. Trans. A, 1997, 28A, 1689–1698.
10. KNOTT J. F.: J. Iron Steel Inst., 1966, 204, 104.
11. SMITH E.: Proc. Conf. ‘Physical basis of yield fracture’ 36; 1966 Oxford Institute of Physics Publishing.
12. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
13. 10.1179/03063457679043145310.1179/030634576790431453 ↗
14. 10.1179/msc.1978.12.11.51110.1179/msc.1978.12.11.511 ↗
15. 10.1179/msc.1979.13.6.34110.1179/msc.1979.13.6.341 ↗
16. 10.1179/03063458279042753210.1179/030634582790427532 ↗
17. 10.1179/03063458479042038410.1179/030634584790420384 ↗
18. 10.1080/02670836.1996.1166571910.1080/02670836.1996.11665719 ↗
19. 10.1179/msc.1980.14.8-9.31910.1179/msc.1980.14.8-9.319 ↗
20. 10.1179/mst.1994.10.4.33410.1179/mst.1994.10.4.334 ↗
21. DAHL W. and REES H.: ‘Grundlagen des Festigkeits und Bruchverhalten’ 54-70; 1974 Dusseldorf Stahleisen Verlag.
22. VODOPIVEC F., , VOJVODIC-TUMA J., , and LOVRECIC-SARAZIN M.: Kovine Zlitine TehnoL, 1998, 32, 463–470.
23. LEREIN J. and EMBURY J. D.: Conf. Proc. ‘What the Charpy tests show us’ Denver CO Nov. 1978 (ed. Rozenfield A. R. et al) 33-53; 1978 Materials Park OH ASM International.
24. 10.1016/0022-5096(77)90003-510.1016/0022-5096(77)90003-5 ↗
25. 10.1115/1.344335710.1115/1.3443357 ↗
26. 10.2320/matertrans1989.34.104210.2320/matertrans1989.34.1042 ↗
27. KNOTT J. F.: Met. Sci., 1980, 14, 327–336.
28. 10.1080/1478643560823816310.1080/14786435608238163 ↗
29. THOMSON R. M.: in ‘Physical metallurgy’ (ed. Cahn R. W. and Haasen P.) 2208-2291; 1996 Amsterdam Elsevier Science.
30. COTTRELL A. H. and STOKES R. J.: Proc. R. Soc. A 1955 A233 17.10.1098/rspa.1955.0243 ↗
31. SANDSTRDM R., and BERGSSTRDM Y.: Met. Set., 1984, 18, 177–186.
32. KNOTT J. F.: Trans. 151.1 1981 21 305–317.10.2355/isijinternational1966.21.305 ↗
33. 10.1016/0022-3697(87)90118-110.1016/0022-3697(87)90118-1 ↗
34. VOJVODIC-TUMA J.: Int. J. Fract. to be published.
35. BARSON J. M. and ROLFE S. T.: ‘Correlations between Ric and Charpy V notch tests results in the transition temperature in impact testing of metals’ 5TP466 281-302; 1970 West Conshohocken PA ASTM.10.1520/STP32067S ↗