Innovative surface microcracking treatment of polymeric substrate to be coated with plasma sprayed stainless steel
Source abstract
Abstract
Coating of organic substrates to improve properties has attracted interest because of the potential industrial applications for these materials. Thermal spraying is an attractive coating technology for this purpose owing to its high deposition rate relative to competing processes; however, actual industrial applications remain limited because of poor bonding between the polymeric substrate and the thermal sprayed deposit. Consequently, specific surface preparation of the polymer is required in most cases. In the present study, an innovative surface treatment of a polymeric material allowing subsequent buildup of a plasma sprayed coating is reported. This patented process, known as Pinpro, was successfully applied to coat an organic stereolithography substrate with an AISI 316 stainless steel thick (1 mm) deposit. The process consists in creating a population of surface microcracks in the polymer to provide mechanical anchoring for the steel deposit. Methods of surface preparation were investigated and optimised. The main surface modification mechanisms were elucidated and a phenomenological model of coating buildup on the treated substrate is proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Additive Manufacturing and 3D Printing Technologies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre for Plasma Processing (C2P), Ecole des Mines de Paris, BP 87, 91003, Evry Cedex, France
References (35)
Show source-provided references
1. TERRAT M.: ‘Métallisation des plastiques et composites’; 1997 Saint-Etienne Ecole Nationale Supérieure des Mines de Saint-Etienne.
2. HUBERT H. BLEIN F. FRESTON A. JEANDIN M. PAVEN C. LE and HOUDY P.: Proc. ITSC ‘98: 15th Int. Thermal Spray Conf. (ed. Coddet C.) 1469— 1473; 1998 Materials Park OH ASM International.10.31399/asm.cp.itsc1998p1469 ↗
3. BOUAIFI B. DRAUGELATES U. GRIMBERG I. SOIFER K. and WEISS B. Z.: Proc. ITSC ‘95: 14th Int. Thermal Spray Conf. (ed. Ohmori A.) 627-632; 1995 Osaka High Temperature Society of Japan.
4. LUGSCHEIDER E. and BITTNER D.: Proc. 2nd Plasma-Technik Symp. (ed. S. Blum-Sandmeier et al) Vol. 3 115-124; 1991 Lucerne Häfliger Druck AG.
5. ASHARI A. A. and TUCKER R. C.: Proc. ITSC ‘98: 15th Int. Thermal Spray Conf. (ed. Coddet C.) 1255-1258; 1998 Materials Park OH ASM International.10.31399/asm.cp.itsc1998p1255 ↗
6. LUCCHESE P. JEANDIN M. LAVERNIIE A. DE and SURDON G.: Proc. 9th Natl Thermal Spray Conf.: ‘Thermal spray: practical solutions for engineering problems’ (ed. Berndt C. C.) 239-244; 1996 Materials Park OH ASM International.10.31399/asm.cp.itsc1996p0239 ↗
7. SMITH R. W. BITTNER D. LUGSCHEIDER E. and MATHESIUS R.: Proc. 7th Natl Thermal Spray Conf.: ‘Thermal spray industrial applications’ (ed. Berndt C. C. and Sampath S.) 67-72; 1994 Materials Park OH ASM International.
8. HA S. W., , GISEP A., , GRUNER H., , MAYER J., , and WINTERMANTEL E.: Bioceramics, 1997, 3, 203–206.
9. WEISS L. E. LEVENT-GURSOZ E. PRINZ F. B. FUSSELL P. S. MAHALINGAM S. and PATRICK E. P.: Manuf Rev. 1990 3 (1) 40 — 48.
10. FUSSELL P. S. PATRICK E. P. PRINZ F. B. SCHULTZ L. THUEL D. G. WEISS L. E. and KIRCHNER H. O. K.: SAE Aerospace Atlantic 1991 1–8.10.4271/911114 ↗
11. 10.1007/BF0264827210.1007/BF02648272 ↗
12. 10.1007/BF0264627210.1007/BF02646272 ↗
13. XU B. LIU X. MA S. and CHEN Z.: Proc. ITSC ‘98: 15th Int. Thermal Spray Conf. (ed. Coddet C.) 1039-1042; 1998 Materials Park OH ASM International.10.31399/asm.cp.itsc1998p1039 ↗
14. NEWBERY A. P. GRANT P. S. JORDAN R. M. ROCHE A. D. and CARR T. C.: Proc. ITSC ‘98: 15th Int. Thermal Spray Conf. (ed. Coddet C.) 1223-1228; 1998 Materials Park OH ASM International.10.31399/asm.cp.itsc1998p1223 ↗
15. BUCHWALIIIC L. P. J. Adhes. Scl Technol, 1990, 4, (9), 697 — 721.
16. 10.1016/0143-7496(93)90028-810.1016/0143-7496(93)90028-8 ↗
17. CUEF R., , BAUD G., , BESSE J. P., , JACQUET M., , and BENMALEK M.: J. Adhes., 1993, 42, 249 — 254.
18. 10.1002/sia.74020051410.1002/sia.740200514 ↗
19. 10.1002/macp.1997.02198080710.1002/macp.1997.021980807 ↗
20. wu s.: ‘Polymer interface and adhesion’; 1982 New York Marcel Dekker.
21. HAYWOOD D. M. and KIRICBRIDE A. N.: Proc. 2nd Plasma-Technik Symp. (ed. S. Blum-Sandmeier et al.) Vol. 1 373-381; 1991 Lucerne Häfliger Druck AG.
22. 10.1016/0143-7496(95)00028-310.1016/0143-7496(95)00028-3 ↗
23. HENNE R. H. and SCHITTER C.: Proc. 8th Natl Thermal Spray Conf.: ‘1995 advances in thermal spray science and technology’ (ed. Berndt C. C. and Sampath S.) 527-531; 1995 Materials Park OH ASM International.
24. REARDON J. D.: Proc. Conf. on ‘Thermal spray coatings: new materials processes and applications’ October—November 1984 27–30.
25. 10.1361/10599639877035082810.1361/105996398770350828 ↗
26. TROCZYNSKI T. PAWLOWSKI L. THIRD N. COVELLI L. and SMUROV I.: Proc. ITSC ‘98: 15th Int. Thermal Spray Conf. (ed. Coddet C.) 1337-1342; 1998 Materials Park OH ASM International.10.31399/asm.cp.itsc1998p1337 ↗
27. BENGTSSON P. JONANNESSON T. and WIGREN J.: Proc. ITSC ‘95: 14th Int. Thermal Spray Conf. (ed. Ohmori A.) 513-518; 1995 Osaka High Temperature Society of Japan.
28. HAUTEFEUILLE-BEYLAT L. CARRON D. and PUIG T.: in ‘Laser de puissance et traitements des matériaux’ (ed. Vannes A. B.) 304-331; 1991 Lausanne Presses Polytechniques et Universi-taires Romandes.
29. JEANDIN M. ALBERT D. MARTINOU R. LECHERVY P. and VARELA D.: Proc. CISFFEL ‘88: 4th Int. Colloq. on ‘Welding and melting by electrons and laser beam’ (ed. M. Contré and M. Kuncevic) 663-672; 1988 Saclay CEN.
30. HEDACQ S. BORIT F. GUIPONT V. and JEANDIN M.: ‘Surface processing of substrates prior to plasma spraying’ patent pending in Europe provisional file 9814594 1998.
31. BERNARD A. and TAILLANDIER G.: ‘Le prototypage rapide’; 1998 Paris Hermes.
32. ANDRE J. C. and CORBEL S.: ‘La stereophotolithographie laser’; 1994 Paris Polytechnica.
33. JOHNSON J. J.: ‘Principles of computer automated fabrication’; 1994 Irvine CA Palatino Press.
34. PANG T. H.: ‘Stereolithography and other RP&M technologies’; 1995 New York ASME.
35. GUIPONT V. COCHELIN E. BORIT F. DECKER L. JEULIN D. and JEANDIN M.: Surf Eng. 1998 14 (5) 400–404.10.1179/sur.1998.14.5.400 ↗