Effect of niobium and titanium on tin precipitation in Fe alloys
Source abstract
Abstract
In an attempt to manage tin segregation in steel, the formation of intermetallic compounds of tin with niobium, titanium, and aluminium was investigated. Two series of alloys based on Fe, Sn, and Al with either Nb or Ti additions were prepared by arc melting under argon. After cold rolling, the alloys were annealed at 850°C for 96 h. The microstructures were studied using scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and microprobe analysis. The level of Nb addition was found to affect the formation of Sn rich compounds. For small Nb additions, no Sn containing compounds were found, whereas the higher Nb alloy exhibited a Fe 2 Nb based Laves phase containing about 1 at.-%Sn. Some η-Fe 2 Nb 3 , which was associated with the alumina formation, was also found but did not contain tin. No Sn compounds were found with Ti additions. The experimental observations were compared with thermodynamic calculations performed using MTDATA software.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Electronic Packaging and Soldering Technologies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Department of MaterialsSchool of Process, Environmental and Materials Engineering, University of Leeds, Leeds, LS2 9JT, UK
References (18)
Show source-provided references
1. MOORE J. J.: Int. Met. Rev., 1978, 23, (5), 241–262.
2. WHITELEY J. H., and BRAITHWAITE A.: J. Iron Steel Inst., 1923, 57, (1), 161–169.
3. SHELMERDINE A. B., and ROBINS D. A.: J. Iron Steel Inst., 1965, 203, (1), 40–46.
4. THWAITES C. T., and CHATTERJEE S. K.: J. Iron Steel Inst., 1972, 210, (8), 581–587.
5. VIDALES B.: ‘Removal of copper from molten scrap steel’, PhD Thesis, Brunel University, UK, 1994.
6. MASSALSKI T. B. SUBRAMANIAN P. R. OKAMOTO H. and KACPRZAK L.: ‘Binary alloy phase diagrams’ Vol. 1-3 2nd edn; 1990 Metals Park OH ASM International.
7. REED s. J. B.: ‘Electron microprobe analysis and scanning electron microscopy in geology’; 1996 Cambridge Cambridge University Press.
8. EDINGTON J. W.: ‘Electron diffraction in the electron microscope’; 1975 London Macmillan.10.1007/978-1-349-02595-4 ↗
9. RAGHAVAN V.: ‘Phase diagrams of ternary iron alloys: part 1’; 1997 Metals Park OH ASM International.
10. 10.1016/0364-5916(91)90030-N10.1016/0364-5916(91)90030-N ↗
11. ANSARA I. and SUNDMAN B.: ‘Computer handling and dissemination of data’ Proc. 10th CODATA Int. Conf. (ed. Glaeser P.) 154–157; 1987 Amsterdam Elsevier.
12. SERVANT C., and ANSARA I.: J. Chilli. Phys., 1997, 94, (5), 869–888.
13. 10.1016/S0364-5916(96)00021-110.1016/S0364-5916(96)00021-1 ↗
14. COELHO G. C. FRIES S. G. LUKAS H. L. MAJEWSKI P. BEJARANO J. M. Z. GAMA S. RIBEIRO C. A. and EFFENBERG G.: Proc. Symp. on ‘Processing and applications of high purity refractory metals and alloys’ Pittsburgh PA USA October 1993 51-70; 1994 Warrendale PA USA The Minerals Metals and Materials Society.
15. DAVIES R. H., , HINSDALE A. T., , CHART T. G., , BARRY T. I., , and RAND M. H.: High Temp. Sci., 1989, 26, 251–262.
16. BEJARANO J. M. Z., , GAMA S., , RIBEIRO C. A., , EFFENBERG G., , and SANTOS C.: Z. Metallkd., 1991, 82, (8), 615–620.
17. BEJARANO J. M. Z., , GAMA S., , RIBEIRO C. A., , and EFFENBERG G.: Z. Metallkd., 1993, 84, (3), 160–164.
18. SCHON C. G., and TENORIO J. A. S.: Illter Metaiiics, 1996, 4, (3), 211–216.