Effect of strain rate on tensile deformation and fracture behaviour of 18%Ni 300 maraging steel sheet
Source abstract
Abstract
AbstractDeformation and fracture under uniaxial tensile loading at room temperature were investigated for 18%Ni 300 maraging steel sheet in the strain rate range 1·67×10−5 to 1·67× 10−1s−1. The steel showed an increase in flow stress with strain rate and the increase in yield strength (YS) was more pronounced compared with the tensile strength (TS), resulting in a corresponding decrease of TS/YS ratio. Both the level of deformation and the deformation zone were also reduced by the increasing strain rate. Fractographic analysis indicated that the increasing strain rate induced, to some extent, plane strain constraint in the sheet resulting in increasing fracture angle, decreasing ductility/fracture strain, and increasing dimple size. With increasing strain rate the work hardening rate dσ/dɛ and strain hardening coefficient (n value) of the steel also decreased; hence, correlations were found between dσ/dɛ, TS/YS ratio, and n value. The decrease of these three parameters caused strain localisation as confir...
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. F. DECKER: ‘Source book on maraging steels’, 354; 1979, Metals Park, OH, ASM.
2. A-UL-HAQ F. H. HASHMI · Met. Mater. · 1985 · 227
3. 10.1016/0025-5416(73)90066-910.1016/0025-5416(73)90066-9 ↗
4. 10.1007/BF0265350810.1007/BF02653508 ↗
5. WINTER P. L. · Metall. Trans., 17A, 307.
6. 10.1007/BF0264403710.1007/BF02644037 ↗
7. 10.1179/mst.1988.4.1.1610.1179/mst.1988.4.1.16 ↗
8. KEELER S. P. · Sheet Met. Ind. · 1971 · 512
9. MAZHAR A. A. · Sheet Met. Ind. · 1988 · 65 · 32
10. CAMPION D. J. · Sheet Met. Ind. · 1967 · 160
11. 10.1007/BF0267228510.1007/BF02672285 ↗
12. 10.1016/0025-5416(82)90156-210.1016/0025-5416(82)90156-2 ↗