journal article·1996-12

Properties of NbC-TiAl and TiB 2 -TiAI composites produced by plasma transferred arc process

A. Hirose, K. Abotani, R. Aoki, K. F. Kobayashi

Materials Science and Technology· Volume 12· Issue 12
Publisher page

Abstract

Intermetallic compound based composites (IMCs) consisting of particles of NbC and TiB2 in Ti-36 wt-%Al (NbC-TiAl and TiB2-TiAl respectively), with varying volume fraction of reinforcing particles, were produced by a plasma transferred arc process. In NbC-TiAl IMCs, the hardness and 0·2% compressive proof stress increased steadily with increasing volume fraction of NbC whereas the tensile strength was lower than that of the unreinforced TiAl regardless of the volume fraction of NbC. In TiB2-TiAl IMCs, the hardness and 0·2% compressive proof stress exhibited maximum values at a volume fraction of 5 vol.-%TiB2. The maximum tensile strength of ∼500 MN m−2, which is almost twice that of the unreinforced TiAl, was obtained at a volume fraction of 5 vol.-%TiB2. The initial improvement of mechanical properties due to the addition of TiB2 was considered to be caused by the reinforcing effect of the TiB2 particles, grain refinement, and the disappearance of γ grains in 3–5 vol.-%TiB2-TiAl IMCs. The deterioration of the mechanical properties observed for a volume fraction of >5 vol.-%TiB2 may be attributed to the increase in the amount of y grains with increasing volume fraction of TiB2 particles from 7 to 15 vol.-% and the increase in coarse TiB2 particles that can act as crack initiation sites in tensile tests.MST/3434
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. BOWMAN R. · Adv. Mater. Process. · 1989 · 36 · 35
2. ADAMS M. L. · Int. J. Powder Metall · 1990 · 26 · 105
3. 10.2355/isijinternational.31.124910.2355/isijinternational.31.1249 ↗
4. 10.1016/B978-0-12-341832-6.50011-610.1016/B978-0-12-341832-6.50011-6 ↗
5. 10.1557/JMR.1992.089410.1557/JMR.1992.0894 ↗
6. 10.1016/0001-6160(89)90162-410.1016/0001-6160(89)90162-4 ↗
7. 10.1007/BF0266321510.1007/BF02663215 ↗
8. 10.2320/materia1962.30.2410.2320/materia1962.30.24 ↗
9. 10.1016/0921-5093(93)90507-B10.1016/0921-5093(93)90507-B ↗
10. 10.1007/BF0265231910.1007/BF02652319 ↗