Impact and chevron notch fracture toughness testing of particulate metal matrix composites
Source abstract
Abstract
Reliable mechanical testing procedures for particulate metal matrix composites are essential for both alloy development and component design. The measurement of toughness properties in these materials presents particular difficulties. In this paper, Charpy impact and chevron notch fracture toughness testing of an Al2124–17%SiC alloy are described. Although impact testing is a relatively simple technique for grading alloy toughness, it has not been widely used for metal matrix composites. Here, the effects of notch type and specimen thickness are examined and recommendations are made regarding the optimum testing procedure. Conventional fracture toughness tests using prefatigued specimens are difficult to apply to particulate metal matrix composites because residual stresses give rise to bowed crack fronts. The short bar chevron notch test, in which a crack is initiated at the apex of the machined notch and the toughness is evaluated after the crack has grown to a critical length, is therefore particularly suitable for these materials.MST/2073
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. 10.1179/mst.1990.6.12.119910.1179/mst.1990.6.12.1199 ↗
2. B. ROEBUCK and J.D. LORD: in Proc. Meeting 'Test techniques for metal matrix composites', (ed. N. D. R. Goddard), 110–128; 1991, Bristol, Institute of Physics.
3. A. MORTENSEN: in Proc. Conf. on 'Fabrication of particulates reinforced metal composites', (ed. J. Masounave and F. G. Hamel), 217–233; 1990, Materials Park, OH, ASM.
4. K. M. PREWO: in Proc. Conf. 'Mechanical behaviour of metal-matrix composites', (ed. J. E. Hack and M. F. Amateau), 181–194; 1983, Warrendale, PA, AIME.
5. NARDONE v. C. · Metall. Trans. · 1991 · 22 · 17110.1007/BF03350959 ↗
6. 10.1179/mst.1992.8.8.70110.1179/mst.1992.8.8.701 ↗
7. 10.1007/BF0001992110.1007/BF00019921 ↗
8. 10.1016/0013-7944(83)90081-410.1016/0013-7944(83)90081-4 ↗
9. 10.1007/BF0001824010.1007/BF00018240 ↗
10. 10.1007/BF0001713410.1007/BF00017134 ↗
11. 10.1007/BF0116058710.1007/BF01160587 ↗
12. T. W. ORANGE, R. T. BUBSEY, W. S. PIERCE, and J. L. SHANNON, Jr: in Proc. Conf. 'Chevron-notch fracture test experience', ASTM STP 1172, (ed. K. R. Brown and F. I. Baratta), 54–62; 1992, Philadelphia, PA, ASTM.10.1520/STP24710S ↗
13. 10.1016/0013-7944(88)90151-810.1016/0013-7944(88)90151-8 ↗
14. 10.1016/S0036-9748(88)80152-210.1016/S0036-9748(88)80152-2 ↗
15. 10.1016/0036-9748(89)90371-210.1016/0036-9748(89)90371-2 ↗
16. 10.1016/0921-5093(89)90392-410.1016/0921-5093(89)90392-4 ↗
17. T. M. OSMAN, J. J. LEWANDOWSKI, and W. H. HUNT, Jr: in Proc. Conf. 'Fabrication of particulates reinforced metal composites', (ed. J. Masounave and F. G. Hamel), 209–216; 1990, Materials Park, OH, ASM.
18. W. H. HUNT, Jr: unpublished data cited by A. Mortensen, in Proc. Conf. 'Fabrication of particulates reinforced metal composites', (ed. J. Masounave and F. G. Hamel), 217–233; 1990, Materials Park, OH, ASM.
19. 10.1520/STP32733S10.1520/STP32733S ↗
20. 10.1520/STP32732S10.1520/STP32732S ↗
21. P. T. PURTSCHER, J. D. McCOLSKEY, and E. R. DREXLER: 'Chevron-notch fracture test experience', ASTM STP 1172, (ed. K. R. Brown and F. I. Baratta), 110–130; 1992, Philadelphia, PA, ASTM.10.1520/STP24714S ↗
22. J. W. BRAY: 'Chevron-notch fracture test experience', ASTM STP 1172, (ed. K. R. Brown and F. I. Baratta), 131–143; 1992, Philadelphia, PA, ASTM.10.1520/STP24715S ↗