journal article·1985-07

Microstructural defects and their origins in Cd–CuCd3eutectic

M. A. Ruggiero, J. W. Rutter

Publisher page

Abstract

In this investigation, macrostructural and microstructural imperfections, formed in the fibrous Cd–CuCd3 eutectic during unidirectional solidification, were characterized and the factors important in their formation were studied. The effect of growth rate R, imposed thermal gradient G, and natural convection on the defect morphology were investigated, and the important physical factors that determine the manner in which microstructural defects form were considered. Convection was found to play a minimal role in defect formation. The most important variable was found to be the ratio G/R, which determined the solid/liquid interface shape during solidification. When low values of G/R were used, eutectic cells were formed. For intermediate values of G/ R, the microstructure was found to contain features analogous to nodes in single–phase materials. Only when high values of G/R were used were all microstructural defects eliminated, producing a nearly perfect structure of parallel CuCd3 rods in a matrix of cadmium. The morphology of branching and curving rods, which were found to be the primary microstructural defects, indicates that both the solid/solid interfacial free energy and its anisotropy are important factors in rod branching, and a branching mechanism consistent with the observations made was proposed. Anisotropy in the solid/solid interfacial free energy was considered to account for the formation of blades; however, kinetic considerations were required to account for the growth dependence of the rod-to-blade transition observed in this eutectic.MST/130
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. 10.1007/BF0054077010.1007/BF00540770 ↗
2. SPENCER C. R. · et al.: Phys. Rev. B Condens. Matter · 1978 · 18 · 18
3. HOPKINS R. H. · Trans. AIME · 1968 · 242 · 1627
4. FAVIER J. J. · J. Br. Interplanetary Inst., · 1978 · 31 · 271
5. 10.1007/BF0291752810.1007/BF02917528 ↗
6. 10.1007/BF0266132410.1007/BF02661324 ↗
7. 10.1016/0022-0248(72)90005-X10.1016/0022-0248(72)90005-X ↗
8. 10.1016/0022-0248(69)90038-410.1016/0022-0248(69)90038-4 ↗
9. TROTTIER J. P. · Office National d'Etude-Recherche Aerospatiels · 1970 · 5 · 233
10. JACKSON K. A. · Trans. AIME · 1966 · 236 · 843
11. W. A. TILLER: in ‘Liquid metals and solidification’, 276; 1958, Cleveland, Ohio, American Society for Metals.
12. D. J. S. COOKSEY, M. G. DAY, and A. HELLAWELL: ‘Crystal growth’, 151; 1967, Oxford, Pergamon Press.
13. LEMKEY F. D. · Trans. AIME · 1965 · 233 · 334
14. 10.1016/0022-0248(77)90114-210.1016/0022-0248(77)90114-2 ↗
15. JONES B. L. · Trans AIME · 1968 · 242 · 1891
16. JEFFREY D. · Trans. AIME · 1969 · 245 · 2435
17. 10.1007/BF0266268410.1007/BF02662684 ↗
18. 10.1016/0022-0248(74)90096-710.1016/0022-0248(74)90096-7 ↗
19. M. MCLEAN: ‘Directionally solidified materials for high temperature service’, 70–74; 1983, London, The Metals Society.
20. 10.1139/p52-03610.1139/p52-036 ↗
21. 10.1139/p53-00310.1139/p53-003 ↗
22. 10.1016/0022-0248(76)90124-X10.1016/0022-0248(76)90124-X ↗