Investigation of process zone structure in Fe–3Si alloy
Source abstract
Abstract
An in situ fracture experiment was carried out in a scanning electron microscope to investigate plastic deformation and strain distribution in the process zone (PZ) located in the immediate vicinity of the crack tip in an Fe–3Si alloy (wt-%) under mixed mode loading conditions. It was observed that plastic deformation occurred by successive activation of a number of slip systems. The strain distribution and shape of the PZ were strongly dependent on the crystallographic orientation of the grain containing the crack tip. The distribution differed from that predicted using near tip blunting calculations and was best expressed by an exponential equation. Additional strain concentrations created by surface defects caused slight perturbations in the overall distribution. Crack propagation started along a coarse slip band which possessed the highest strain. It was found that the maximum strains in the PZ exceeded the uniaxial tensile fracture strain.MST/1404
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. KRAFFT J. M. · Appl. Mater. Res., · 1964 · 1 · 88
2. 10.1007/BF0264257010.1007/BF02642570 ↗
3. F. A. McCLINTOCK and G. R. IRWIN: ‘Fracture toughness testing and its application’, STP 381, 84; 1965, Philadelphia, PA, ASTM.10.1520/STP26586S ↗
4. 10.1007/BF0239777910.1007/BF02397779 ↗
5. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
6. 10.1179/msc.1980.14.3.9510.1179/msc.1980.14.3.95 ↗
7. W. W. GERBERICH and N. B. MOODY: ‘Fatigue mechanisms’, STP 675, 292-341; 1979, Philadelphia, PA, ASTM.10.1520/STP35897S ↗
8. 10.1115/1.342323310.1115/1.3423233 ↗
9. w. w. GERBERICH: ‘Fracture mechanics’, STP 945, (ed. D. T. Read and R. P. Read), 5-18; 1985, Philadelphia, PA, ASTM.
10. n. w. and J. S. ICE: ‘Moire method’, Experimental Techniques in Fracture Mechanics, No. 2, 111-165; 1975 Syracuse, NY, University of Syracuse.
11. 10.1016/0022-5096(68)90013-610.1016/0022-5096(68)90013-6 ↗
12. 10.1007/BF0232129410.1007/BF02321294 ↗
13. 10.1016/0025-5416(85)90064-310.1016/0025-5416(85)90064-3 ↗
14. 10.1016/0921-5093(89)90097-X10.1016/0921-5093(89)90097-X ↗
15. 10.1007/BF0266301910.1007/BF02663019 ↗
16. J. A. BEGLEY and J. D. LANDES: ‘The J integral as a fracture criterion’, STP 514, 1-20; 1972, Philadelphia, PA, ASTM.10.1520/STP38816S ↗
17. 10.1016/0022-5096(68)90014-810.1016/0022-5096(68)90014-8 ↗
18. J. R. RICE and M. A. JOHNSON: in ‘Inelastic behaviour of solids’, (ed. M. F. Kanninen et al.), 641-672; 1970, New York, McGraw-Hill.
19. 10.1016/0022-5096(77)90003-510.1016/0022-5096(77)90003-5 ↗
20. 10.1115/1.344335710.1115/1.3443357 ↗
21. 10.1007/BF0281605010.1007/BF02816050 ↗