journal article·1988-09

Extrusion processing of Al–Li–Mg–Zr alloy

N. C. Parson, T. Sheppard

Publisher page

Abstract

The hot deformation behaviour of an Al–Li–Mg–Zr alloy was characterised in hot torsion and extrusion. The alloy was found to have similar hot ductility to existing high strength aluminium alloys, but this could be maintained at higher temperatures. Billets were extruded over a range of process conditions and a limit diagram was constructed for surface cracking. All the extrusions were found to be partially recrystallised after deformation, but the volume fraction of recrystallisation was a strong function of billet temperature and extrusion ratio. In addition, the unrecrystallised areas contained a recovered substructure where the subgrain size was inversely proportional to the temperature compensated strain rate. The as extruded structure was retained during solution treatment and as a result final mechanical properties were strongly dependent on the extrusion conditions. The use of high billet temperatures and low extrusion ratios gave the best combination of strength and toughness.MST/839
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. PEEL C. J. · 'Aluminium-lithium alloys III' (Conf. Proc.), (ed. C. Baker et al.), 26-36; 1986, London, The Institute of Metals.
2. REYNOLDS M. A. · 'Aluminium-lithium alloys III' (Conf. Proc.), (ed. C. Baker et al.), 57-65; 1986, London, The Institute of Metals.
3. 10.1179/03071697580327725810.1179/030716975803277258 ↗
4. 10.1007/BF0267228710.1007/BF02672287 ↗
5. 10.1179/mst.1987.3.4.28510.1179/mst.1987.3.4.285 ↗
6. R. P. VIEROD: PhD thesis, University of London, 1983.
7. P. A. TUNNECLIFFE: PhD thesis, University of London, 1979.
8. PARSON N. C. · 'Aluminium-lithium alloys II' (Conf. Proc.),
9. N. C. PARSON: PhD thesis, University of London, 1985.