Aluminium and Al–4·5Cu alloy end chill: structural observation and heat flow analysis
Source abstract
Abstract
End chill experiments were performed on aluminium and Al–4·5Cu (wt-%) in order to study the effect of melt superheat (20–150 K), chill material (copper, iron, or sand), and specimen length (890–230 mm) on the type and size of macrostructure. Increasing melt superheat increases the length of columnar zone, which is shorter for the alloy than for the commercial purity metal. The columnar fraction increases with the thermal conductivity of the chill material and the heat transfer coefficient. The results are correlated with the temperature gradient, solidification rate, and growth rate obtained from a heat flow model. The columnar to equiaxed transition is found to occur at a critical temperature gradient and growth rate. These critical values differ with alloy composition. The grain size of columnar and equiaxed grains is found to follow a power relationship with solidification rate.MST/1709
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. MURTHY K. · Mod. Cast., · 1965 · 47 · 142
2. 10.1179/03063458479042023010.1179/030634584790420230 ↗
3. 10.1179/mst.1989.5.4.36210.1179/mst.1989.5.4.362 ↗
4. 10.1007/BF0265616310.1007/BF02656163 ↗
5. 10.1007/BF0267370510.1007/BF02673705 ↗
6. UHLMANN D. R. · Trans. Am. Inst. MM. Eng., · 1966 · 236 · 527
7. COLE G. S. · Trans. Am. Inst. Min. Eng., · 1967 · 239 · 1924
8. MORANDO R. · Metall. Trans., · 1970 · 1 · 140710.1007/BF02900262 ↗
9. 10.1007/BF0041200410.1007/BF00412004 ↗
10. 10.1016/0025-5416(84)90201-510.1016/0025-5416(84)90201-5 ↗
11. 10.1179/mst.1986.2.5.50810.1179/mst.1986.2.5.508 ↗