journal article·1994-05

Optimisation of hot rolling schedule for direct charging of thin slabs of Nb–V microalloyed steel

N. Zentara, R. Kaspar

Materials Science and Technology· Volume 10· Issue 5
Publisher page

Abstract

A recently developed continuous casting simulator and the ‘Wumsi’ hot deformation simulator have been used to carry out laboratory simulation tests to determine the as cast microstructure and the recrystallisation behaviour of a Nb–V microalloyed steel during the process of direct charging. By variation of the initial specimen thickness (between 25 and 60 mm) different values of total strain ΦΣ could be imposed to improve the coarse as cast microstructure. For a series of deformation schedules the total strain was divided systematically into two components: an austenite grain refining strain ΦγGF (above the recrystallisation stop temperature TRS) and an austenite strengthening strain ΦγS (below TRS). After hot deformation slow and accelerated cooling with simulated coiling were employed. It was found that a total strain ΦΣ>1·4 is required to ensure mechanical properties that were comparable or even superior to those found using the conventional cold charging process. The coarse as cast austenite microstructure can be refined significantly when ΦγGF=0·3–0·6. The austenite strengthening strain ΦγS represents the dominant component of the total strain if a satisfactory toughness is to be achieved. Strength properties are less sensitive to the applied strain.MST/1872
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. KASE M. · Steel Times · 1985 · 212 · 268
2. KAWAKAMI K. · Stahl Eisen · 1988 · 108 · 1125
3. WIESINGER H. · Stahl Eisen · 1984 · 104 · 1161
4. USIEBORI H. · Tetsu-To-Hagane (J. Iron Steel Inst. Jpn) · 1988 · 74 · 1235
5. YOSHIDA K. · Tetsu-To-Hagane (J. Iron Steel Inst. Jpn) · 1988 · 74 · 124010.2355/tetsutohagane1955.74.7_1240 ↗
6. UCHIDA S. · Nippon Kokan Tech. Rep. (Overseas) · 1987 · 48 · 1
7. RESCH W. · Stahl Eisen · 1983 · 103 · 479
8. BESSEMER H. · Stahl Eisen · 1891 · 11 · 921
9. HOFFKEN E. · Stahl Eisen · 1985 · 105 · 1167
10. HOFFKEN E. · Stahl Eisen · 1986 · 106 · 1253
11. IVERSON F. K. · Stahl Eisen · 1991 · 111 · 37
12. ROHDE W. · Stahl Eisen · 1991 · 111 · 47
13. KASPAR R. · Steel Res. · 1991 · 62 · 50110.1002/srin.199100440 ↗
14. PAWELSKI O. · Materialpriifung · 1988 · 30 · 357
15. KASPAR R. · Materialprüfung · 1989 · 31 · 14
16. I. WEISS, G. L. FITZSIMONS, K. MIELITYINEN-TIITTO, and A. J. DeARDO: in Proc. Conf. ‘Thermomechanical processing of microalloyed austenite', 33–57; 1982, Warrendale, PA, The Metallurgical Society of AIME.