Characterisation of two Al–Fe based high temperature alloy powders
Source abstract
Abstract
Aluminium alloys containing additions of iron and cerium are among the alloys being developed as potential replacements for titanium based alloys for moderately high temperature applications. Development of these alloys is possible using rapid solidification technology, which results in a very fine distribution of dispersoids in the aluminium matrix. The microstructures of two rapidly solidified high temperature alloy powders of composition (wt-%) Al–6·7Fe–5·9Ce (alloy A) and Al–6·2Fe–5·9Ce–1·63Si (alloy B) have been characterised using transmission electron microscopy and the results are explained on the basis of some of the major solidification parameters, such as nucleation undercooling and recalescence. It was observed that most of the powder particles in the +10 to −20 μm size range contained both microcellular and cellular regions, which could be explained in terms of an initial large undercooling followed by recalescence. The decomposition of the powder microstructure after exposing the powders to temperatures of 350, 420, and 500°C for 1 h was investigated using transmission electron microscopy. This work was complemented by phase identification studies using X-ray diffraction. The equilibrium precipitates Al13Fe4, Al8Fe2Si, and Al3FeSi were detected in the powder microstructure of alloy B, whereas Al13Fe4 precipitates were detected in alloy A after high temperature exposure (500°C).MST/1571
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. 10.1007/BF0264693010.1007/BF02646930 ↗
2. Y. W. KIM: in ‘Dispersion strengthened aluminium alloys’, (ed. Y. W. Kim and W. M. Griffiths), 517; 1988, Warrendale, PA, TMS.
3. T. E. TEITZ and I. G. PALMER: in ‘Advances in powder technology’, 189; 1982, Metals Park, OH, ASM.
4. 10.1007/BF0239686310.1007/BF02396863 ↗
5. 10.1007/BF0112001510.1007/BF01120015 ↗
6. 10.1179/03063458379042041110.1179/030634583790420411 ↗
7. 10.1179/imr.1982.27.1.18510.1179/imr.1982.27.1.185 ↗
8. 10.1007/BF0264331210.1007/BF02643312 ↗
9. G. J. MARSHALL: in ‘Aluminium technology '86’, (ed. T. Sheppard), 629; 1986, London, The Institute Of Metals.
10. 10.1007/BF0264385310.1007/BF02643853 ↗
11. 10.1179/mst.1990.6.6.52810.1179/mst.1990.6.6.528 ↗
12. L. E MONDOLFO: ‘Aluminium alloys: structure and properties’, 284, 369; 1976, London, Butterworths.10.1016/B978-0-408-70932-3.50008-5 ↗
13. G. MICHOT and G. CHAMPIER: in ‘Proceedings of the second international conference on aluminium alloys — their physical and mechanical properties’, (ed. C. Q. Chen and E. A. Starke, Jr), 743; 1990, Beijing, Beijing University of Aeronautics and Astronautics.