article·2014-01-01

Static recrystallization microstructure and model of Mn18Cr18N retaining rings steel

HE Wen-w

Abstract

The static recrystallization softening behavior by two-pass compression test of Mn18Cr18 N retaining ring steel were investigated on a Gleeble 1500 D thermo-simulation machine. Effect of deformation temperature,strain rate,deformation degree and initial austenite grain size on the static recrystallization microstructure was analyzed. The softening fraction of static recrystallization was determined using the 2%stress offset method and it was modified with the metallographical observation. Then static recrystallization kinetic model was established and the activation energy for static recrystallization is determined as 249. 3 k J /mol. The results show that the shape of static recrystallization softening curves of Mn18Cr18 N steel is sigmoidal and obeys the Avrami law. The volume fraction of static recrystallization increases with the longer holding time,and the higher the hot deformation temperature is,the higher the volume fraction of static recrystallization also becomes. At the lower temperature and smaller deformation degree,the incubation time is longer and static recovery occurs. There is a good agreement between the predicted value and experimental results,which provides a reliable model of hot upsetting simulation for retaining ring steel.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.