Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel
Source abstract
Abstract
The present work is concerned with investigating the effects of high power diode laser (HPDL) radiation on the microstructure of an amalgamated alumina/silica based oxide compound (AOC). The main rapid solidification theories, namely constitutional supercooling and the theory of morphological stability, are used to explain the observed microstructural changes in the AOC resulting from HPDL interaction. Without laser treatment of the AOC surface it was impossible to fire the enamel onto the AOC. However, wetting experiments, using a number of control liquids and the sessile drop technique, revealed that laser treatment of the AOC surface significantly altered the wetting characteristics of the AOC and allowed the enamel to bond to the AOC. Accordingly, HPDL treatment was identified as allowing the vitreous enamel to wet the surface by causing a decrease in the enamel contact angle from 118° to 33°. Moreover, no discernible difference was seen in the change in contact angle across the range of rapid solidification microstructures obtained. The actual incidence of rapid surface resolidification, and not the degree of rapid surface resolidification, was therefore identified as being the primary factor governing changes in contact angle. The bonding mechanisms were identified as being principally owing to van der Waals forces, however, some evidence of chemical bonding was also observed. The work has clearly shown that laser radiation can be used to alter the wetting characteristics of the AOC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · High-Temperature Coating Behaviors · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. R. MEHRABIAN, B. H. KEAR, and M. COHEN: in 'Rapid solidification processing, principles and technologies II: supercooling and rapid solidification microstructures in metals and alloys', (ed. R. Mehrabian et al), 89–126; 1980, Baton Rouge, Claitors Publishing.
2. M. C. FLEMINGS: 'Solidification processing'; 1974, New York, McGraw-Hill.10.1007/BF02643923 ↗
3. MORDIKE S. · Trans. Powder Metall. Assoc. India · 1990 · 17 · 81
4. J. P. POLLINGER and G. L. MESSING: in Proc. Conf. on 'Emergent process methods for high technology ceramics'; Raleigh, USA, November 1982, 156–167; 1984, New York, Plenum.
5. 10.1007/BF0168931110.1007/BF01689311 ↗
6. 10.1007/BF0265185610.1007/BF02651856 ↗
7. 10.1016/0167-577X(94)00244-410.1016/0167-577X(94)00244-4 ↗
8. 10.1007/BF0072908910.1007/BF00729089 ↗
9. 10.1007/BF0172938410.1007/BF01729384 ↗
10. LI J. G. · Rare Met · 1993 · 2 · 84
11. V. W GUTOWSKI, L. RUSSELL, and A. CERRA: in 'Science and technology of building seals, sealants, glazing and water-proofing: adhesion of silicone sealants to organic-coated aluminium', (ed. J. M. Klosowski), 144–159; 1992, Philadel-phia, ASTM.10.1520/STP14879S ↗
12. 10.1051/jp1:199318010.1051/jp1:1993180 ↗
13. 10.1016/0956-7151(94)90132-510.1016/0956-7151(94)90132-5 ↗
14. LIU Z. · Private communication · 1998
15. J. LAWRENCE, L. LI, and J. T. SPENCER: in Proc. ICALEO '96, 'Laser materials processing'; Detroit, USA, October 1996, 138–148; 1996, Orlando, FL, Laser Institute of America.
16. E. P. DEGARMO, J. T. BLACK, and R. A. KOHSER: in 'Materials and processes in manufacturing', (ed. E. P. DeGarmo et al), 379; 1997, Upper Saddle River, Prentice Hall.
17. L. PENNISI: in 'Engineered materials handbook: ceramics and glasses', (ed. S. J. Schneider), 255–259; 1991, Materials Park, OH, ASM International.
18. W. M. STEEN: 'Laser materials processing', 147; 1991, London, Springer-Verlag.10.1007/978-1-4471-3820-4 ↗
19. D. W. RICHERSON: 'Modern ceramic engineering', 217; 1992, New York, Dekker.
20. T. Z. KATTAMIS: in 'Laser in metallurgy', (ed. K. Mukherjee and J. Mazumder), 1; 1981, New York, AIME.
21. LAWRENCE J. · Mater. Sci. Eng. A · 1999 · 266 · 106710.1016/S0921-5093(99)00021-0 ↗
22. 10.1088/0022-3727/32/10/30110.1088/0022-3727/32/10/301 ↗
23. 10.1088/0022-3727/32/18/30110.1088/0022-3727/32/18/301 ↗
24. BOURELL D. L. · Int. J. Powder Metall · 1992 · 28 · 369
25. 10.1039/tf944400054610.1039/tf9444000546 ↗
26. 10.1557/JMR.1995.198410.1557/JMR.1995.1984 ↗
27. 10.1016/0001-8686(74)85001-310.1016/0001-8686(74)85001-3 ↗
28. 10.1021/ie50660a00810.1021/ie50660a008 ↗
29. D. K. CHATTORAJ and K. S. BIRDI: 'Adsorption and the Gibbs surface excess', 95; 1984, New York, Plenum.10.1007/978-1-4615-8333-2 ↗
30. 10.1021/j100834a01210.1021/j100834a012 ↗
31. 10.1002/jbm.82029040210.1002/jbm.820290402 ↗
32. V. A. GREENHUT: in 'Engineered materials handbook — adhesives and sealants', (ed. H. F. Brinson), 298–311; 1991, Materials Park, OH, ASM International.
33. J. A. PASK and A. P. TOMISA: in 'Engineered materials handbook — ceramics and glasses', (ed. S. J. Schneider), 482–492; 1991, Materials Park, OH, ASM International.
34. V. V. VARGIN: 'Technology of enamels', 49–56; 1965, London, MacLaren and Sons.
35. 10.1016/0257-8972(95)02483-210.1016/0257-8972(95)02483-2 ↗
36. LUI Z. · PhD thesis · 1991
37. 10.1007/BF0036893710.1007/BF00368937 ↗
38. 10.1007/BF0117153710.1007/BF01171537 ↗
39. 10.1109/77.23335110.1109/77.233351 ↗
40. K. E. EASTERLING: 'Introduction to the physical metallurgy of welding'; 1992, Oxford, Butterworth-Heinemann.
41. BRADLEY L. · Appl. Surf. Sci · 1998 · 138
42. LAWRENCE J. · PhD thesis · 1999