journal article·2023-11

Rubber toughened glass fibre reinforced high impact polystyrene

Fares D. Alsewailem, Abdulrahman M. Al-ameri

Materials Science and Technology· Volume 39· Issue 15
Publisher page

Abstract

This study aimed to investigate the effect of combining reinforcement agents (i.e. glass fibres) and rubber particles (ethylene-propylene grafted maleic anhydride, EP-g-MA) on the properties of high impact polystyrene (HIPS). HIPS was melt blended and compounded with EP-g-MA and glass fibres at a total weight percentage of both constituents ranging from 0 to 10 wt-%. HIPS content was kept fixed in all prepared samples of 90 wt-%. Samples for testing were prepared in accordance with ASTM 265D and ASTM D 1708 for Izod impact strength and tensile strength, respectively. It was shown that the toughness of HIPS could be significantly enhanced by proper combination of EP-g-MA and glass fibres. Composites with EP-g-MA content greater than 7 wt-% and glass fibre content of 3 wt-% had izod impact strength values greater than 99 J m −1 which reflects 11–77% enhancement over those value for neat HIPS and HIPS reinforced with 10 wt-% glass fibres .
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials research Institute, King Abdulaziz city for science and technology (KACST), Riyadh, Saudi Arabia

Chemical engineering department, College of Engineering, King Saud University, Riyadh, Saudi Arabia

Funding

King Abdulaziz City for Science and Technology

References (10)

Show source-provided references
1. 10.3390/polym1409189310.3390/polym14091893 ↗
2. 10.1016/j.polymer.2004.10.00510.1016/j.polymer.2004.10.005 ↗
3. 10.1016/j.radphyschem.2007.02.08510.1016/j.radphyschem.2007.02.085 ↗
4. 10.1016/j.matlet.2014.02.08710.1016/j.matlet.2014.02.087 ↗
5. 10.1002/app.4029910.1002/app.40299 ↗
6. 10.1016/j.ultras.2006.05.14210.1016/j.ultras.2006.05.142 ↗
7. Threepopnatkul P, Kulsetthanchalee C. Effect of ZnO and TiO2 on properties of polystyrene/nitrile rubber electrospun fiber mats. Mater Today. 2018;5:10917–10924.
8. 10.1016/j.surfin.2021.10160710.1016/j.surfin.2021.101607 ↗
9. 10.1016/j.jmrt.2022.04.05310.1016/j.jmrt.2022.04.053 ↗
10. 10.1002/pat.408810.1002/pat.4088 ↗