Post-processing influence on additively produced Ti–6Al–4V alloy structure and mechanical properties
Source abstract
Abstract
This article studies the formation of microstructure and mechanical properties of Ti–6Al–4V alloy manufactured by direct laser deposition (DLD) as a result of post-processing. Heat treatment, hot rolling and hot isostatic pressing (HIP) of additively produced material as well as different combinations of these methods were carried out as part of the investigation. It was determined that material density increased as an average of 0.05% as a result of post-processing. Specimen's microstructure changed subtly upon post-processing, however, HIP of specimens caused widmanstatten structure decomposition and resulted in the most intense material strength deterioration. Post-processing including plastic deformation causes a decrease in material tensile strength at an average of 3% and an increase in elongation by almost 2 times.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metal Forming, National University of Science and Technology «MISIS», Moscow, Russia
Moscow Polytechnic University, Scientific Activity Sector, Moscow, Russia
Funding
This work was financially supported by the Moscow Polytechnic University within the framework of the grant named after Pyotr Kapitsa.
References (23)
Show source-provided references
1. ASTM International · 2021
2. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
3. 10.1016/j.msea.2009.02.01910.1016/j.msea.2009.02.019 ↗
4. 10.1115/1.128647210.1115/1.1286472 ↗
5. 10.1016/j.ijmachtools.2005.01.01410.1016/j.ijmachtools.2005.01.014 ↗
6. 10.1088/0022-3727/37/14/00310.1088/0022-3727/37/14/003 ↗
7. 10.1016/j.optlastec.2010.06.01510.1016/j.optlastec.2010.06.015 ↗
8. Shuangyin Z · Rare Met Mater Eng · 2009 · 38 · 774
9. 10.1016/j.addma.2015.07.00110.1016/j.addma.2015.07.001 ↗
10. Deckard CR, inventor; University of Texas System, assignee. Method and apparatus for producing parts by selective sintering. United States patent US 4,863,538 A. 1989 Sep 5.
11. 10.1007/978-1-4419-1120-910.1007/978-1-4419-1120-9 ↗
12. 10.1007/s00170-015-7576-210.1007/s00170-015-7576-2 ↗
13. Kobryn P, Semiatin S. Mechanical properties of laser-deposited Ti-6Al-4V. In: Proceedings of the 2001 International Solid Freeform Fabrication Symposium; 2001. p. 179–186.
14. 10.1016/j.addma.2017.10.01510.1016/j.addma.2017.10.015 ↗
15. 10.1016/j.msea.2013.04.09910.1016/j.msea.2013.04.099 ↗
16. 10.1016/j.addma.2015.07.00210.1016/j.addma.2015.07.002 ↗
17. 10.1016/j.matlet.2019.12669010.1016/j.matlet.2019.126690 ↗
18. 10.1016/j.jmrt.2020.06.01910.1016/j.jmrt.2020.06.019 ↗
19. 10.1007/s00170-020-05132-010.1007/s00170-020-05132-0 ↗
20. 10.1016/j.jmatprotec.2018.08.04110.1016/j.jmatprotec.2018.08.041 ↗
21. Boyer R · 1994
22. 10.3390/ma1415415910.3390/ma14154159 ↗
23. 10.1016/j.matdes.2003.09.00910.1016/j.matdes.2003.09.009 ↗