journal article·2023-04

Effect of electropulsing intensity on nucleation of TiN in 321 stainless steel

Dongjian Huang, Zhenghai Zhu, Xiang Zheng, Zixuan Xiao, Lijun Xiao, Chengcheng Yang, Tengfei Zhao

Materials Science and Technology· Volume 39· Issue 6
Publisher page

Abstract

In the process of titanium microalloyed steel continuous casting, tiny TiN can refine solidification structures, while thick TiN will affect casting. In this paper, the experimental results showed that electropulsing could refine the size of TiN precipitates and improve the nucleation rate of the TiN precipitates. The larger electropulsing intensity resulted in a better effect. The modelling results showed that electropulsing could reduce the nucleation barrier of TiN in the molten steel and the two-phase region. In addition, the larger the electropulsing intensity and the higher the temperature, the better the promotion effect is. This research is of great significance for solving the problem of nozzle clogging and solidification microstructure refinement of titanium microalloyed steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Material Properties and Failure Mechanisms · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Metallurgical Engineering, Anhui University of Technology, Ma'anshan, People's Republic of China

National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing, People's Republic of China

Funding

National Natural Science Foundation of China

References (37)

Show source-provided references
1. Yong Q-L. The second phase in steel materials. 1st ed. Beijing: Metallurgical Industry Press; 2006.
2. Liu H-Y. Research on controlled rolling and controlled cooling process of nano-precipitation strengthened steel containing Ti and Mo[D]. Shenyang: Northeastern University; 2019.
3. Liang W, Hu J, Liu W-Y. Study on high temperature thermoplasticity of high Nb,Ti microalloyed steel at 600∼1200°C, iron steel. Vanadium Titanium. 2019;40:124–130 + 141.
4. Li Y-T, Qiao J-L, Li L-X. Effects of (Mg1/3Nb2/3)4+ substitution on the temperature-stable and low-loss (Mg1/3Nb2/3)x(Zr0.5Ti0.5)1-xO2 microwave dielectric ceramics. Ceram. 2021;48:6850–6858.
5. Zhang P, Wu H, Tang D Dissolving behaviors of carbonitrides in Nb-V-Ti and V-Ti microalloying steels. Acta Metall. 2007;43:753–758.
6. Wang H-Y. Influence of rare earth on dissolution and precipitation behavior of niobium carbide in microalloyed steel[D]. Univ Sci Technol Beijing. 2017.
7. Yao C-F, Man T-H, Bao Y-Z. Effect of final forging temperature on microstructure and impact toughness of Nb-V-Ti microalloyed Non-quenched and tempered steel. Shanghai Met. 2016;038:39–42 + 53.
8. 10.1016/j.jcrysgro.2011.03.02510.1016/j.jcrysgro.2011.03.025 ↗
9. 10.1179/1743281211Y.000000001410.1179/1743281211Y.0000000014 ↗
10. 10.1016/j.corsci.2020.10921910.1016/j.corsci.2020.109219 ↗
11. Xia M-S, Li X-J, Wang Z-G Proceedings of the 2014 national steelmaking-continuous casting production technology conference. Tangshan. 2014:438–442.
12. Guo W-Y, Hu X-Q, Ma X-P Effect of TiN precipitation on solidification microstructure of medium carbon Cr-Mo wear-resistant steel. Acta Metall. 2016;52:769–777.
13. Shi W, Zhao J-T, Sun Y-B Discussion on effect of titanium microalloying on impact toughness of Q345D steel. Heat Treat Technol Equip. 2014;35:31–34.
14. Sun Y-H, Bai X-F, Yin X Research on clogging of immersion nozzle for 321 stainless steel billet. Chin J Eng. 2016;38:109–118.
15. Zhang L-F. Several topics of non-metallic inclusions in steel that need further study. Steelmaking. 2016;32:1–16.
16. Zheng H-G, Chen W-Q, Li Z-E Different mechanisms of nodule nodule in continuous casting nozzle of 304 and 321 stainless steel. J Univ Sci Technol Beijing. 2004;26:596–599.
17. Wang A-R, Zhang Q-C, Wang G-F Study on the production of HRB400 hot-rolled ribbed steel bar by titanium-iron nitride microalloying technology. Iron Steel Vanadium Titanium. 2015;36:38–42.
18. Yang Y-H, Wang M-Q, Wang C-F Study on austenite grain growth of titanium niobium microalloyed gear steel. JISRI. 2012;24:32–36.
19. Luo X, Yang C-S, Kang Y-L Effect of precipitated particles on austenite grain growth of titanium microalloyed high strength steel. Chin J Eng. 2016;38:230–234.
20. Zhu L-P, Xu Y-D, Nie J-J Effect of nano-TiN particles on microstructure and properties of A356 aluminum alloy. Ordnance Mater Sci Eng. 2013;36:63–65.
21. 10.1179/1743284714Y.000000074310.1179/1743284714Y.0000000743 ↗
22. Zhang X-F, Lu W-J, Qin R-S. Morphology and distribution control of MnS inclusions in molten steel by electropulsing. Mater Res Innovations. 2014;18:244–248.
23. 10.4028/www.scientific.net/MSF.654-656.46410.4028/www.scientific.net/MSF.654-656.464 ↗
24. Zhu Z-H, Xiao L-J, Peng S-H A model for the composite precipitation of the second phase in niobium-titanium microalloyed steel during continuous casting. JISRI. 2014;26:18–22. + 27.
25. Xu S-L, Chen N-H. Effect of pulse current density on tensile properties of Ti-1.5Al alloy plates for piano mufflers. Forg Stamp Technol. 2021;46:199–205.
26. 10.1557/jmr.2015.26810.1557/jmr.2015.268 ↗
27. 10.1016/j.jallcom.2008.05.02410.1016/j.jallcom.2008.05.024 ↗
28. 10.2991/emeit.2012.31210.2991/emeit.2012.312 ↗
29. 10.2355/isijinternational.ISIJINT-2020-53810.2355/isijinternational.ISIJINT-2020-538 ↗
30. Jin A-B, Chen S-J, Sun H Particle flow characteristics based on inhomogeneous particle size distribution. J Cent South Univ. 2020;51:1673–1681.
31. Zhao T-F, Zheng X, Huang D-J Thermodynamic research on the precipitation of Ti2O3, TiN and TiC in continuous casting of titanium microalloyed steel, (ICETMS 2021). Zhoushan, China. 2021:2076(1):012077.
32. Zhu Z-H, Dong H-B, Zhou L Effect of electropulsing on the precipitation of NbCxN1−x from austenite phase. Mater. 2020;36:1566–1573.
33. 10.1007/s42243-021-00557-710.1007/s42243-021-00557-7 ↗
34. Qin R-S, Zhou B-L. Exploration on the fabrication of bulk nanocrystalline materials by direct-nanocrystrallizing method II theoretical calculation of grain size of metals solidified under electropulsing. J Mater. 1997;11:69–72.
35. Qin R-S, Yan H-C, He G-H Exploration on the fabrication of bulk nanocrystalline materials by direct-nanocrystrallizing method I nucleation in disordered metallic media by electropulsing. J Mater. 1995;9:219–222.
36. Chen J-X. Data manual of commonly used charts in steelmaking. Beijing: Metallurgical Industry Press. 1984.
37. Samsonov GV VinitS̑Kiĭ IM. Hand book refractory compounds metallurgiya in Moscow 1976.