journal article·2022-04

Recrystallisation kinetics and yield-strength adjustment after annealing of cold-rolled microalloyed steel

Pablo Bruno Paiva Leão, S. L. S. Medeiros, B. R. C. Saraiva, J. R. Barros Neto, C. C. Silva, Antonio J. Ramirez, H. F. G. de Abreu

Materials Science and Technology· Volume 38· Issue 6
Publisher page

Abstract

After continuous annealing process (CAP) at 790°C, 85% of the coils of 50% cold-rolled low carbon microalloyed (LCM) steel did not exhibit yield-strength (YS) on the target range, while the 70% cold-reduced LCM coils did. In this context, the non-isothermal recrystallisation kinetics of ferrite for the above two full-hard LCM steel were investigated using differential scanning calorimetry and the Friedman differential isoconversional method. The recrystallisation kinetics of ferrite for the two deformed states showed different behaviour. Regarding a fixed degree of cold-rolling deformation, the soaking temperature was found as the manageable parameter to control YS during CAP. Consequently, a suitable YS of the 50% cold-rolled LCM steel was achieved by setting the soaking temperature at 773°C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Universidade Federal do Ceará, Fortaleza, Brazil

Department of Materials Engineering, Universidade Federal do Piaui, Teresina, Brazil

Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA

Funding

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil

References (35)

Show source-provided references
1. 10.1002/srin.20170021010.1002/srin.201700210 ↗
2. 10.1080/03019233.2018.144649610.1080/03019233.2018.1446496 ↗
3. Humphreys J · 2017
4. 10.1016/j.msea.2017.03.03310.1016/j.msea.2017.03.033 ↗
5. 10.2355/isijinternational.51.81810.2355/isijinternational.51.818 ↗
6. 10.1007/s10853-014-8029-210.1007/s10853-014-8029-2 ↗
7. 10.1016/j.matchar.2019.10982210.1016/j.matchar.2019.109822 ↗
8. 10.1016/S0921-5093(00)01882-710.1016/S0921-5093(00)01882-7 ↗
9. 10.2355/isijinternational.41.105310.2355/isijinternational.41.1053 ↗
10. 10.1007/s11661-002-0003-y10.1007/s11661-002-0003-y ↗
11. 10.2355/isijinternational.ISIJINT-2020-13210.2355/isijinternational.ISIJINT-2020-132 ↗
12. 10.1023/B:JTAN.0000027811.80036.6c10.1023/B:JTAN.0000027811.80036.6c ↗
13. 10.1007/s10973-007-8763-710.1007/s10973-007-8763-7 ↗
14. 10.1002/polc.507006012110.1002/polc.5070060121 ↗
15. 10.1016/j.tca.2008.04.01110.1016/j.tca.2008.04.011 ↗
16. 10.1007/s10853-017-1680-710.1007/s10853-017-1680-7 ↗
17. Sente Software Ltd. (2021). JMatPro® [Internet] Guildford: Surrey Research Park [cited 2021 Dec 8]. Available from: https://www.sentesoftware.co.uk/.
18. 10.1016/j.tca.2020.17868810.1016/j.tca.2020.178688 ↗
19. 10.2355/isijinternational.34.92710.2355/isijinternational.34.927 ↗
20. 10.1007/BF0264721910.1007/BF02647219 ↗
21. 10.1155/TSM.1.18310.1155/TSM.1.183 ↗
22. 10.1016/j.msea.2005.05.09310.1016/j.msea.2005.05.093 ↗
23. 10.1016/S1359-6454(96)00371-010.1016/S1359-6454(96)00371-0 ↗
24. 10.1016/j.msea.2019.02.03210.1016/j.msea.2019.02.032 ↗
25. 10.1016/j.msea.2007.07.07710.1016/j.msea.2007.07.077 ↗
26. 10.1016/j.jsamd.2018.12.00710.1016/j.jsamd.2018.12.007 ↗
27. 10.1016/j.jnoncrysol.2015.01.00810.1016/j.jnoncrysol.2015.01.008 ↗
28. 10.1002/srin.20200040710.1002/srin.202000407 ↗
29. 10.3390/cryst1107075910.3390/cryst11070759 ↗
30. 10.3390/jcs508022210.3390/jcs5080222 ↗
31. 10.1016/j.mtla.2020.10098510.1016/j.mtla.2020.100985 ↗
32. 10.1007/s10853-019-04160-w10.1007/s10853-019-04160-w ↗
33. 10.1007/BF0264855110.1007/BF02648551 ↗
34. 10.2355/isijinternational.47.120410.2355/isijinternational.47.1204 ↗
35. 10.1179/imr.1982.27.1.30710.1179/imr.1982.27.1.307 ↗