journal article·2020-07

In situ tensile of ultra-narrow gap laser welded joint of bainitic steel

Cheng Zhu Zhang, Hui Chen, Xiao Yi Yang, Xu Zhao

Materials Science and Technology· Volume 36· Issue 10
Publisher page

Abstract

Ultra-narrow gap laser welding (ultra-NGLW) is an advanced welding technology for thick bainite steel with a welding gap of only 4 mm. We studied the failure mechanism of the tensile fracture of ultra-NGLW joints of bainitic steel via in situ tensile tests. The tests show that cracks for all micro-zone specimens propagated along the tensile direction at 42°∼45°. Further analysis of the crack tips by Electron Back Scatter Diffraction showed main cracks along directions with high Schmid Factors (SF >0.44), and micro-cracks were found on the grain boundaries of (111) and (101) grains. It was revealed that the wire-filling zone and heat-affected zone were mainly intergranular expansion, whereas in the no filling zone, the crack propagation was transgranular.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, People's Republic of China

Funding

Development Program of China

References (21)

Show source-provided references
1. 10.1016/j.optlastec.2014.04.01510.1016/j.optlastec.2014.04.015 ↗
2. 10.3788/CJL201744.110200610.3788/CJL201744.1102006 ↗
3. 10.1007/s00340-011-4577-110.1007/s00340-011-4577-1 ↗
4. 10.1016/j.ijpvp.2013.11.00210.1016/j.ijpvp.2013.11.002 ↗
5. 10.3788/CJL201138.100300210.3788/CJL201138.1003002 ↗
6. 10.1016/j.optlastec.2016.03.01610.1016/j.optlastec.2016.03.016 ↗
7. 10.1007/s00170-016-8929-110.1007/s00170-016-8929-1 ↗
8. 10.1016/j.msea.2014.09.08810.1016/j.msea.2014.09.088 ↗
9. 10.1016/j.optlaseng.2016.11.01110.1016/j.optlaseng.2016.11.011 ↗
10. Xin-Ping L, Fu-Zhen X. Heterogeneous mechanical property and microstructure of welded joints of CrMoV steel. Pressure Vessel Technology, 2014.
11. Dandan K · Hot Work Technol · 2018 · 47 · 221
12. 10.1016/S0308-0161(98)00097-010.1016/S0308-0161(98)00097-0 ↗
13. 10.1016/j.phpro.2015.08.29910.1016/j.phpro.2015.08.299 ↗
14. Wenzheng W, Yongkang Z, Fuyin J Study on fiber laser wire filling welding process and weld microstructure of 20 steel. Hot Working Technology, 2013.
15. 10.3901/JME.2016.02.04710.3901/JME.2016.02.047 ↗
16. 10.3788/CJL20103705.136110.3788/CJL20103705.1361 ↗
17. Xiaobo Z · China Mech Eng · 2010 · 21 · 2746
18. Li-Hua QI · J Shanghai Jiaotong Univ · 2012 · 46 · 1455
19. Guibin C, Xinhua JU, Lixin Y EBSD characterization on the grain size of ferrite of ultra low-carbon IF steel. Materials Rev. 2018.
20. Hua Y · Hot Work Technol · 2014 · 43 · 64
21. Ning XU, Fenghui W, Jinheng L In-situ TEM observation of micro-fracture behavior of X80 pipeline steel welding joint. Mater Sci Technol, 2015.