The flange deformation characteristics and its effect on failure in the hydroforming process of aluminum alloy rectangular cup
Source abstract
Abstract
A hydroforming process of aluminum alloy rectangular cup was investigated by finite element simulation and experiments.The flange deformation characteristics in the straight edge and corner edge of rectangular cup were analyzed,and its effect on the failure model was also discussed.The results show that the deformation is complicated in corner edge of the flange.There is a little materials subjected to radial compressive stress.The corner edge of flange can be divided into five deformation areas.The ability of winkling resistance in long straight edge is lower than that in short straight edge.So the flange in long straight edge is easier to wrinkle.Thickness reduction in short side wall is larger than that in long straight side wall,the part will crack in punch nose if blank holder gap is too small.And reasonable blank holder gap can prevent the wrinkle and crack.The experimental results verify the numerical one.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.