Microstructures of solidified Sn-9Zn lead-free solder alloy and their evolution in aging
Source abstract
Abstract
Sn-9Zn/Cu solder joints at different cooling rates and different degrees of melt superheating were prepared to investigate their solidification microstructures and their evolution in aging.SEM and OM were employed to observe the microstructures.It was found that that higher cooling rate resulted in finer eutectic structure.When slowly cooled within furnace,Sn-9Zn alloy formed a complete typical lamella eutectic structure.However,when cooled faster in air or in water spray,large rod-like Zn-rich phase formed besides the lamella eutectic microstructure.The results also indicate that the degree of melt superheating has a distinct effect on the eutectic microstructure. A higher superheating leads to finer eutectics.During the aging of the air-cooled Sn-9Zn,rod-like Zn-rich phase dissolved gradually,and significant coarsening of the eutectics occurred as well in the aging at 90 ℃.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.