article·2014-01-01

Effect of cooling rate and high tempering on microstructure and mechanical properties of high-strength low-alloy( HSLA) cast steel

Lei Yon

Abstract

To improve comprehensive mechanical properties of high strength low alloy( HSLA) cast steel,and meet application requirements of HSLA cast steel in harsh environments,the mechanical properties and microstructures of HSLA cast steel cooled at three different cooling rates and subsequently tempered at 580 ℃ were studied by optical microscope,scanning electron microscopy,transmission electron microscopy,impact tester and universal material test. With the cooling rate increasing,the microstructure evolved from ferrite + granular bainite,lath bainite,to lath martensite + quasi upper bainite. Higher plasticity and toughness were obtained at a slower cooling rate of1 ℃ /s. Water cooled sample had maximum strength and hardness,at the expensive of impact energy slightly.Nano-precipitates of granular,short rod were found along grain,lath boundary in cooled samples after tempering.EDS analysis revealed that the precipitates of 100 ~200 nm were M3 C,and that within 50 nm in size were( V,Ti)( C,N). The maximum plasticity and toughness( elongation rate A =27% impact energy,Charpy U-notch impact energy AkU=113 J at-40 ℃) were achieved by air cooled sample after tempering. The yield strength of specimen after cooling and tempering increased,the occurrence of high temperature temper brittleness led to reduction of impact toughness,whereas impact energy was remained 60 J,40 J at-40 ℃,respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.