article·2009-01-01

Electrochemical preparation and characteristics of (Ni-Mo)-TiO_2 composite coating used as electrode materials for hydrogen evolution

Cuili Zhang

Abstract

(Ni-Mo)-TiO2 composite coating was prepared by electrolytic co-deposition of Ni-Mo ally and TiO2 particles on a Cu substrate from a solution in which TiO2 nano particles (P-25) were suspended by stiring. Effects of concentration of TiO2 particles suspended in the plating bath and depositing time on the catalytic activity for the hydrogen evolution reaction (HER) were discussed. The surface morphology and microstructure of (Ni-Mo)-TiO2 coating were observed by SEM and XRD. Catalytic activity for HER was evaluated on the basis of electrochemical steady-state polarization curves in 0.5 mol·dm-3 H2SO4 solution. Results indicate that the (Ni-Mo)-TiO2 electrode consists of TiO2 crystalline and Ni-Mo nano crystalline in solid solution. The composite electrode has better catalytic activity compared with Ni-Mo and Ni alloy electrodes. The polarization over potential for hydrogen evolution of the (Ni-Mo)-TiO2 electrode is 120 mV lower than that of Ni-Mo electrode and is 542 mV lower than that of Ni electrode at the current density of 100 mA·cm-2. The apparent exchange current density of the composite electrode is 2.6 times that of the Ni-Mo electrode,and 60 times that of Ni electrode. The increasing catalytic activity for HER of the (Ni-Mo)-TiO2 composite electrode is mainly due to the change in the reaction mechanism. The apparent Gibbs free energy of activation of the composite electrode is 24.48 kJ·mol-1 lower than that of Ni-Mo electrode.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.