article·2002-01-01

The microstructure and hardness of electrodeposited Co-Ni alloy coatings

Gang Wu

Abstract

Cobalt-mickal alloys were electrodeposited in a sulfamate bath containing various ratios of metallic additives. The relationship between the nickel content in the deposited layer and the ionic concentration of cobalt and nickel in the electrolyte were studied. The microscopic morphology and crystalline structure of the deposited layer with various Co contents were examined by using SEM and XRD techniques. The relationship between the microhardness and chemical composition as well as heat treatment procedures of the deposited layers was also investigated. The experimental results show that when the Co2+/(Co2++Ni2+) value of the electrolyte lies within 0.1~0.5,the Co ions have the strongest tendency to preferential codeposition. The SEM and XRD results show that with increasing the Co content in the deposited layer, the coarse gronular crystals of the low Co content layer transform into time-gramed and uniformly distributed triangular crystals and finally into granular crystals of medium sizes. In the meantime, the Co content in the deposited layer gradually increases, and its structure transforms from fcc Ni solid solution into fcc Co solid solution and at last into Co-solid solution. In the two regions of Co-solid solution(with Co content 20%~50% and 60%~80% respectively) the hardness of the Ni-Co layer is much larger than the hardness of the layer fcc Ni-solid solution with low Co contents.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.