article·2012-01-01

The design and mechanical characteristic research of swallow-tailed slot joint of FRC/steel

Zhiyuan Mei, Tan Da-li, Yang Kun

Abstract

The swallow-tailed slot joint has been put forward and the primary configuration has been designed to meet the demands of water-tight and strong connection between steel and FRC.The tensile strength tests for primary configuration have been carried out,and the results show that,the initial damage of peel breakage appeares at the free end,owing to the convergence of peel stress.Subsequently,the delaminate between upper layers and the slot layers,the extrusion damage of resin matrix,and the shear failure between the interfaces dominate the failure processes of swallow-tailed slot connection.Then,the reinforced configuration of swallow-tailed slot joint has been brought forward,the peel stress and shear stress distribution characteristic among the interfaces have been discussed by experiments and simulations(Abaqus).The experimental results show that the reinforced joint can resist the initial damage at the free end and the strength of connection is increased by 61%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Metal Forming Simulation Techniques · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.