article·2014-01-01

Research on the acoustic performance of porous materials with polystyrene and cement

Zhu Hongb

Abstract

Cement polystyrene particle materials are widely used for exterior insulation materials,which can form porous structure through special preparation and exhibits sound absorbability at the same time. So it can improve the building environment. The sound absorption material is made by compression under certain compression ratio at semi-dry state,using cement as cementing materials,polystyrene grain as aggregate,polypropylene fiber and EVA latex as flexural reinforced materials. The effect of amount of cement and steam curing on the sound absorption coefficient of this material is analyzed. The testing results show that the more the amount of cement,the lower the sound absorption coefficient at high frequency. Too lower amount of cement decreases the sound absorption coefficient at low frequency. With the help of steam curing,resonant cavity structure forms and the sound absorption coefficients at some frequencies increase. Base on theory,the frequency range raised by cavity structure is calculated,and the results are similar to that from actual testing.This paper suggests that the sound absorption coefficient at more frequencies can be advance by adjusting the diameter of polystyrene grain. The polypropylene fiber can enhance the flexural strength. Therefore it is favorable for sound absorbability by using fibers and lower cement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Structural Engineering and Vibration Analysis · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.