Optimization of strength and toughness parameters in hot stamping process for ultra high strength steel
Source abstract
Abstract
To improve the strength and toughness,the effect of heating temperature,holding time and quenching temperature on strength and toughness of born steel SPFH was researched,and L9(34) orthogonal experiment was carried out based on the Kahn tear method to obtain the value of fracture toughness and unit initiation energy(UIE) for SPFH steel.The results indicated that the excellent formability and high strength and toughness for born steel SPFH with 1.6 mm thickness was obtained when the heating temperature was from 920 to 950 ℃,the holding time in 1 min and the quenching temperature was 650~700 ℃.Optimum parameters were used in hot stamping test for typical structural parts,and the properties of specimen such as tear strength,unit initiation energy and the ratio of unit initiation energy to strength was improved by 10.91%,20.32% and 22.17% respectively.Toughness was increased substantially on the basis of a small decrease of strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.