Microstructure control of GH4169 alloy during a new melting and solidification process
Source abstract
Abstract
In order to reduce micro-segregation in large volume GH4169 ingot produced by electroslag remelting process and improve its quality by optimizing the microstructure,the influence of various melting rate on the dendrite arm spacing,size and distribution of Laves phase and micropores in different regions of the ingot were investigated. It was found that the dendrite arm spacing close to the edge of the remelting ingot almost remained the same despite the increase of the melting rate,while the secondary dendrite arm spacing became larger in the central part. Melting rate had weak impact on the dimension of micropores near the edge and center,however the dimension of micropores at R / 2 increased first and then decreased thereafter. In the center part,the Laves phase precipitates were more populated and the concentration increased with the melting rate,whereas it showed an opposite trend in the R / 2 region. The element segregation showed no significant changes in different area. The results also indicated that smaller dendrite arm spacing led to weaker microsegregation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.