Numerical analysis and experimental investigation of tire curing process
Source abstract
Abstract
To investigate tire curing performance of rubber,a numerical simulation was carried out,in which the thermal conductivity,specific heat and density of the rubber were simulated by mixing rule model proposed by authors.The thermal parameters,curing kinetics and induction performance of the rubber were simulated by 3D thermal model,hybrid dynamic model and non-dimensional parameter equation,respectively.ABAQUS was used to solve the heat conduction equation and kinetic model of a radial tire,simultaneously.The results showed that the numerical results corresponded well with experimental results.N600 in the shoulder was the last cured point.When the thickness of bladder decreased by 50%,the induction time of N600 decreased by 5.98%,and the engineering optimum cure time of N600 decreased by 11.84%.When the preheating temperature increased by 66%,the induction time of N600 decreased by 27.05%,while the maximum temperature and engineering optimum cure time of N600 changed slightly.When the steam temperature increased by 5%,the engineering optimum cure time of N600 decreased by 9.29%,while the induction time and maximum temperature of N600 changed slightly.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering Applied Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.