article·2012-01-01

Study on isothermal forging process for aviation joint forging

Shaohui Wang

Abstract

To improve the comprehensive performance of aviation forging,a simulation of an air joint forging forming process for Al-alloy aviation joint forging with high rib and thin wall by isothermal forging technology was done by using Deform 3D software,and the experiment of the scaled(1∶ 5) forging was carried out in laboratory's hydraulic press.The results show that under the condition of isothermal forging process with the billet and die temperatures of 450 ℃ and the forming speed of 0.1 mm/s,the material deformation resistance decreases by 70% in contrast to the conventional warm forging process,and the material flow ability in the cavity are improved.The deformation of forging is uniform and the stress concentration decreases significantly.The fibrous structure with smooth flow lines,fine grain and excellent mechanical properties can be obtained by isothermal forging process and the warm die forging's defects,such as vortex,folding,fibre breaking,unfilling and so on,can be avoided.The simulation results agree with the experimental results,which provide an important basis for the aviation joint forging's forming process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.