article·2005-01-01

Experimental studies of grind-hardening for AISI1045 steel

Judong Liu

Abstract

The surface hardening of AISI1045 steel has been carried out on a surface grinder with dry grinding method. The microstructures and properties in grind-hardened layer were researched. The results showed that the martensite varies from fine to coarse and then backs to fine in the completely hardened zone, due to the coupled effect of temperature field and strain field. The coarse martensite formed in the subsurface. The grinding temperature field affects the microstructure of the transition zone. No significant changes of the micro-hardness were observed; the micro-hardness is 700-750HV in different grind conditions. But when the uniformity of original structure or depth of cut increases, the hardened layer depth increases from 0.9mm to1.4mm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.