journal article·2013-10

High strength (560 MPa) quenched and tempered pipeline steels

J. Xu, R. D. K. Misra, B. Guo, V. S. A. Challa, L. Zheng

Materials Science and Technology· Volume 29· Issue 10
Publisher page

Abstract

We describe here the feasibility of processing high strength 560 MPa (X80) pipeline steels by the quenching and tempering (QT) process. The attributes of the QT process include the elimination of banded duplex phase microstructure of pipeline steel obtained by thermomechanical controlled process, uniformity of microstructure across the thickness of plate and desired bainite phase. Increasing the quenching temperature from 890 to 930°C did not significantly influence the ultimate microstructure and mechanical properties of pipeline steel. When the tempering temperature was increased from 400 to 550°C, a high density of fine precipitates of niobium carbides and/or nitrides of size less than 10 nm were precipitated, with a consequent increase in the yield strength and yield ratio. Ferrous carbides decomposed from retained austenite decreased the continuity of ferrite phase, which resulted in lower tensile strength and a higher yield ratio.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory for Excellence in Advanced Steel Research, Center for Structural and Functional Materials, Institute for Materials Research, University of Louisiana at Lafayette, PO Box 44130, Lafayette, LA 70504, USA

Research and Development Center of Wuhan Iron and Steel (Group) Corporation, Wuhan, 430080, China

References (25)

Show source-provided references
1. Corbett KT · Int. J. Offshore Polar Eng. · 2004 · 14 · 75
2. Pontremoli M: ‘A new generation of ultra-high strength X100/X120 pipelines: A breakthrough for economic long-distance gas transportation’, Proc. 15th Int. Offshore and Polar Engineering Conf. 2005, Seoul, Korea.
3. Zheng L · Iron Steel · 2006 · 41 · 1
4. Hillenbrand HG, Graef MK, Groβ-Weege J, Knauf G, Marewski U: ‘Development of linepipe for deep-water applications’, Proc. 12th Int. Offshore and Polar Engineering Conf. 2002, Kitakyushu, Japan.
5. Nobuyuki I · JFE Techn. Rep. · 2008 · 12 · 15
6. Gao H · Weld. Pipe · 2010 · 33 · 5
7. 10.5006/1.359393110.5006/1.3593931 ↗
8. 10.1016/S0167-577X(02)00720-610.1016/S0167-577X(02)00720-6 ↗
9. Huang K · Steel Roll. · 2004 · 21 · 55
10. Koo LY, Luton MJ, Bangaru NV, Petkovic RA, Fairchild DP, Petersen CW: ‘Metallurgical design of ultra-high strength steels for gas pipelines’, Proc. 13th Int. Offshore and Polar Engineering Conf, May, 2003, Honolulu, HI, USA.
11. Gao H · Weld. Pipe · 1995 · 18 · 7
12. Tohru H, Mitsuhiro O, Fumimaru K, Keniti A: ‘Method of manufacturing thick steel product of high strength and high toughness having excellent weldability and minimual variation of structure and physical properties’, EP 0796921B1, Kawasaki Steel Corporation, Hyogo, Japan, 13 August 2003.
13. Wang B · Iron Steel · 2012 · 47 · 51
14. Tian Y · J. Northeastern Univ. · 2012 · 33 · 1141
15. Strife · Metall. Trans. A · 11 · 134110.1007/BF02653488 ↗
16. 10.1023/A:101529093010710.1023/A:1015290930107 ↗
17. Wang XD · J. Mater. Res. · 24 · 26010.1557/JMR.2009.0029 ↗
18. 10.1016/S0010-938X(98)00139-510.1016/S0010-938X(98)00139-5 ↗
19. Qian H · J. Beijing For. Univ. · 2005 · 27 · 107
20. 10.1016/j.msea.2008.04.03810.1016/j.msea.2008.04.038 ↗
21. 10.1016/j.msea.2007.01.05410.1016/j.msea.2007.01.054 ↗
22. Totten GE: ‘Steel heat treatment handbook’, 2006, Seattle, Washington, USA, CRC Press.10.1201/NOF0849384530 ↗
23. 10.1016/S0010-938X(00)00084-610.1016/S0010-938X(00)00084-6 ↗
24. Shinohara Y, Hara T, Tsura E, Doi N, Murata M: ‘Development of a high strength steel line pipe for strain-based design applications’, Proc. 17th Int. Offshore and Polar Engineering Conf. 2007, Lisbon, Portugal.
25. 10.2355/isijinternational.42.157110.2355/isijinternational.42.1571 ↗